Experimental Research on a Pelton-Type Expander Used in Refrigeration System

您当前的位置：

首页 >

文章列表页 >

Experimental Research on a Pelton-Type Expander Used in Refrigeration System

更新时间：2025-07-09

- Experimental Research on a Pelton-Type Expander Used in Refrigeration System
- Vol. 43, Issue 9, Pages: 95-99(2009)
- 作者机构：
  
  1. 西安交通大学流体机械及压缩机国家工程研究中心,西安,710049
  2. 河南科技大学车辆与动力工程学院,河南,洛阳,471003
- 作者简介：
- 基金信息：
- DOI：
  CLC： TB653
- Online First：10 September 2009，
  
  Published：2009
- 稿件说明：
移动端阅览
Experimental Research on a Pelton-Type Expander Used in Refrigeration System[J]. 2009, 43(9): 95-99.
DOI：

Experimental Research on a Pelton-Type Expander Used in Refrigeration System[J]. 2009, 43(9): 95-99. DOI：

摘要

对在小型氟里昂制冷系统中采用培尔顿式两相膨胀机取代节流阀进行了实验研究.基于热力学和几何分析

设计了具有紧凑、简单结构的双弧面切击式叶轮

制作了膨胀-发电机组

对膨胀机的工作性能进行了分析.在以R410A为制冷剂的小型制冷实验系统中

样机运行平稳可靠.在实验工况下膨胀机的最大单位回收功及等熵效率分别达到了2 447 J/kg和32.8%.实验确定了样机运转的最佳速度区间为13 100～15 310 r/min.在此转速下

膨胀机有最大的等熵效率并产生最大的回收功.实验样机具有结构紧凑、易加工的特点

在小型制冷系统中的应用具有很好的可行性.

Abstract

A Pelton-type two-phase expander was presented to replace the throttling valve in domestic CFCs/HCFCs refrigeration systems. An impulse twin-arc blade impeller with compact and simple structure was designed and a prototype expander-generator unit was manufactured. Experiments were conducted to confirm the feasibility of the expander in the domestic refrigeration system using R410A. The results show that the expander ran reliably under the testing conditions. In addition

the recovery work and isoentropic efficiency of the prototype were up to 2 477 J/kg and 32.8% in the range of 13 100-15 310 r/min

respectively.

关键词

Keywords

references

STOSIC N, SMITH I K,KOVACEVIC A, et al. 小功率高转速蒸汽透平试验研究和优化 [J]. 工程热物理学报, 1995, 16(2): 189-192.SHAO Zenqi. Experimental research and optimization of a small steam turbine with small power and high rotational speed [J]. Journal of Engineering Thermophysics, 1995, 16(2): 189-192.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Novel Ejector Model with Experimental Validation

Influence of Subcooling on Nozzle Efficiency

Effects of Expansion Angle Crater Film Hole on the Film Cooling Characteristics of a Double-Wall Structure

Turbulent Kinetic Energy Dissipation Mechanism of Supercritical Carbon Dioxide Leakage Flow in a Scallop Bionic Seal Cavity

Sensitivity Analysis of Foil Geometrical Parameters for the Third-Generation CO2 Gas Foil Bearings Based on Design of Experiments Method

Related Author

祝银海 1

厉彦忠 1

鱼剑琳 1

蔡文剑 2

贺滔 1

夏春礼 1

Related Institution

School of Energy and Power Engineering, Xi'an Jiaotong University

School of Electrical and Electronic Engineering, Nanyang Technological University

⁰