Multi-Mode Vibration with Piezoelectric Cantilever for Energy Harvesting

您当前的位置：

首页 >

文章列表页 >

Multi-Mode Vibration with Piezoelectric Cantilever for Energy Harvesting

更新时间：2025-07-09

- Multi-Mode Vibration with Piezoelectric Cantilever for Energy Harvesting
- Vol. 44, Issue 6, Pages: 114-119(2010)
- 作者机构：
  
  1. 哈尔滨工业大学机电工程学院,哈尔滨,150001
  2. 齐齐哈尔大学计算机与控制工程学院,黑龙江,齐齐哈尔,161006
- 作者简介：
- 基金信息：
- DOI：
  CLC： TN384;TP211
- Online First：10 June 2010，
  
  Published：2010
- 稿件说明：
移动端阅览
Multi-Mode Vibration with Piezoelectric Cantilever for Energy Harvesting[J]. 2010, 44(6): 114-119.
DOI：

Multi-Mode Vibration with Piezoelectric Cantilever for Energy Harvesting[J]. 2010, 44(6): 114-119. DOI：

摘要

研究了一种带质量块的压电悬臂梁俘能器

推导得到俘能器振型函数

并进行数值计算

分析不同质量比时系统振型特点

以及系统各阶固有频率与质量比的关系.数值计算结果表明:质量比小于0.5时

对系统各阶固有频率影响较大; 质量比趋于无穷大时

自由边界条件会转化为夹持边界条件; 俘能器二阶及二阶以上模态时在梁长度方向上存在应变节点

节点两侧应变符号相反.为提高俘能效率

避免压电晶片电极上电荷抵消现象的发生

可在悬臂梁上应变节点两侧分段粘贴压电晶片

提取多个谐振频率时的振动能

实验结果表明分段电极法可以产生更多的电能.

Abstract

Piezoelectric cantilever energy harvester with seismic mass is investigated. The vibration mode function is deduced

and the numerical calculation reveals the vibration mode characteristics with different mass ratio and the effects of mass ratio on the structure natural frequency. It is demonstrated that the mass ratio (＾overM)

remarkably reduces the structure natural frequencies in the range of (＾overM)

0.5

and infinite (＾overM)

leads to a clamp end boundary condition. Vibration modes of a cantilevered piezoelectric energy harvester other than the fundamental mode have certain strain nodes where the dynamic strain distribution changes sign in the longitudinal direction of beam. Covering the strain nodes of the vibration modes with continuous electrodes results in strong cancellations of the electrical outputs

and energy harvesting efficiency is declined. And how to avoid the cancellation in

energy harvesting by segmented electrode pairs is discussed. The experiment results show that segmented electrodes facilitate generating higher energy.

关键词

Keywords

references

GLYNNE J P, TUDORM J, BEEBY S P, et al. An electromagnetic vibration-powered generator for intelligent sensor systems[J]. Sensors and Actuators: A, 2004, 110:344-349.

MICHESON P D, MIAO P, STARK B H, et al. MEMS electrostatic micropower generator for low frequency operation [J]. Sensors and Actuators: A, 2004, 115:523-529.

程光明, 庞建志, 唐可洪, 等.压电陶瓷发电能力测试系统的研制[J]. 吉林大学学报: 工学版, 2007, 37(2):367-371.

CHENG Guangming, PANG Jianzhi, TANG Kehong, et al. Development of measuring system for electricity generating capacity of piezoelectric ceramics[J]. Journal of Jilin University: Engineering and Technology Edition, 2007, 37(2):367-371.

YUAN Jiangbo, XIE Tao, SHAN Xiaobiao, et al. Resonant frequencies of a piezoelectric drum transducer [J]. Journal of Zhejiang University: Science A, 2009, 10(9):1313-1319.

SEUACIUO-OSORIO T, DAQAQ M F. On the reduced-order modeling of energy harvesters[J]. Journal of Intelligent Material Systems and Structures, 2009,20(16): 2003-2016.

GLYNNE-JONES P, BEEBY S P, WHITE N M. Towards a piezoelectric vibration-powered microgenerator[J]. Sci Meas Technol, 2001,148(2): 68-72.

阚君武,唐可洪,王淑云,等. 压电悬臂梁发电装置的建模与仿真分析[J]. 光学精密工程, 2008, 16(1): 71-76.

KAN Junwu, TANG Kehong, WANG Shuyun, et al. Modeling and simulation of piezoelectric cantilever generators [J]. Optics and Precision Engineering, 2008, 16(1):71-76.

袁江波,单小彪,谢涛,等. 悬臂梁单晶发电机实验[J]. 光学精密工程,2009, 17(5): 1072-1077.

YUAN Jiangbo, SHAN Xiaobiao, XIE Tao, et al. Experiment of monocrystal piezoelectric generator with cantilever beam structure[J]. Optics and Precision Engineering, 2009, 17(5): 1072-1077.

ELVIN N, ELVIN A, CHOI D H. A self-powered damage detection sensor [J]. J Strain Anal Eng Des,2003,38(2):115-124.

SODANO H A, INMAN D J, PARK G. Generation and storage of electricity from power harvesting devices[J]. Journal of Intelligent Material Systems Structures, 2005,16(1): 67-75.

曲方远. 功能陶瓷的物理特性[M]. 北京:化学工业出版社,2007:183-185.

THOMSON W T, DAHLEH M D. Theory of vibration with applications [M]. Beijing: Tsinghua University Press, 2005.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Vibration Energy Harvesting and Deformation Sensing of Long Flexible Piezoelectric Beam

Parameters Identification for Joint Surfaces of Cantilever Beam

Modeling and Experimental Study of Piezoelectric Energy Harvester under Vortex-Induced Vibration

Effects of Steam Addition on the Swirl Combustion and Emission Characteristics of Cracked Ammonia

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

Related Author

CHANG Wenyan

WANG Hu

NIU Zhongrui

ZHANG Senrong

SONG Rujun

ZHANG Dan

ZHANG Leian

尤晋闽

Related Institution

山东理工大学机械工程学院，255000，山东淄博School of Mechanical Engineering, Shandong University of Technology, Zibo, Shandong 255000, China

山东国创精密机械有限公司，251700，山东滨州Shandong Guochuang Precision Machinery Co., Ltd., Binzhou, Shandong 251700, China

山东理工大学电气与电子工程学院，255000，山东淄博School of Electrical and Electronic Engineering, Shandong University of Technology, Zibo, Shandong 255000, China

School of Mechanical Engineering, Xi'an Jiaotong University

School of Mechatronics Engineering, Harbin Institute of Technology

⁰