Flow and Heat Transfer Characteristics in Middle Pressure Turbine Stage in Supercritical Steam Turbines

您当前的位置：

首页 >

文章列表页 >

Flow and Heat Transfer Characteristics in Middle Pressure Turbine Stage in Supercritical Steam Turbines

更新时间：2025-07-09

- Flow and Heat Transfer Characteristics in Middle Pressure Turbine Stage in Supercritical Steam Turbines
- Vol. 45, Issue 7, Pages: 9-14(2011)
- 作者机构：
  
  西安交通大学叶轮机械研究所,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK474.7
- Online First：10 July 2011，
  
  Published：2011
- 稿件说明：
移动端阅览
Flow and Heat Transfer Characteristics in Middle Pressure Turbine Stage in Supercritical Steam Turbines[J]. 2011, 45(7): 9-14.
DOI：

Flow and Heat Transfer Characteristics in Middle Pressure Turbine Stage in Supercritical Steam Turbines[J]. 2011, 45(7): 9-14. DOI：

摘要

通过采用耦合流场计算和共轭传热的数值方法

研究了超临界汽轮机高压缸冷却蒸汽对中压缸第一级固体部件的冷却特性及其对级气动性能的影响

同时对比了有无蒸汽冷却的中压缸第一级的流场和温度场.结果表明:蒸汽冷却技术可以有效地对中压缸第一级动叶叶片、叶根、转子及轮盘进行冷却.受到冷却孔的抽吸作用而进入冷却孔的冷却蒸汽对冷却孔及周围的叶根区域具有明显的冷却作用.在蒸汽冷却的作用下

中压缸第一级转子系统温度下降的最大幅度达80 K.部分冷却蒸汽进入中压缸第一级叶栅主流道并与主流掺混

从而使得根部反动度增大

动叶通道涡强度增加.所以

蒸汽冷却技术可以有效提高高温转子的运行寿命和安全的可靠性.

Abstract

The coupling of the flow field calculation and the conjugate heat transfer method was employed to investigate the cooling characteristics of the steam from the high pressure cylinder of a supercritical steam turbine to cool the solid parts of the first stage in the middle pressure cylinder and the influence of the cooling effect on aerodynamic performance of the first stage. The flow field and the temperature field in the first stage of the middle pressure cylinder with steam cooling were compared with those without steam cooling. The results show that the steam cooling technology can effectively reduce the temperature of the rotor blade

blade root

rotor and wheel disc of the first stage. The cooling steam flowing through the cooling holes by pumping action of the cooling holes has obvious cooling effect on the cooling holes and their surrounding area. The temperature of the rotor system of the first stage in the middle pressure cylinder decreases by up to 80 K. In addition

part of the cooling steam enters the main flow passage of the first stage and mixes with the main flow

leading to greater hub reaction and strength of the passage vortex.

关键词

Keywords

references

史进渊, 杨宇, 孙庆, 等. 超超临界汽轮机部件冷却技术的研究 [J]. 动力工程, 2003, 23(6): 2725-2739.

SHI Jinyuan,YANG Yu,SUN Qing,et al. Research on component cooling technique of ultra-supercritical steam turbines [J]. Power Engineering, 2003, 23(6): 2725-2739.

KOSMAN W. The influence of cooling flows on the operating conditions of the ultra-supercritical steam turbine components,ASME GT2010-22706[R]. New York,USA: ASME, 2010.

史宣平,李劲松,王永中.1 000 MW超超临界汽轮机高温部件的冷却设计 [J].东方电气评论,2009, 23: 18-22.

SHI Xuanping, LI Jingsong, WANG Yongzhong. Cooling design for high temperature parts of ultra-supercritical 1 000 MW steam turbine [J]. Dongfang Electric Review, 2009, 23: 18-22.

吕智强, 韩万金.超超临界汽轮机蒸汽冷却技术的数值研究 [J]. 哈尔滨工业大学学报, 2005, 37(12): 1703-1704.

LÜ Zhiqiang, HAN Wanjin. Numerical investigation of cooling technique in ultra-supercritical steam turbine[J].Journal of Harbin Institute of Technology, 2005,37(12): 1703-1704.

吕智强, 周逊, 刘顺隆.超超临界汽轮机中压转子冷却效果分析[J]. 哈尔滨工业大学学报, 2010, 42(7): 1168-1171.

LÜ Zhiqiang, ZHOU Xun, LIU Shunlong. Analysis of the cooling efficiency of medium pressure rotor in ultra-supercritical turbine [J]. Journal of Harbin Institute of Technology, 2010, 42(7): 1168-1171.

杨建道, 竺晓程, 杨建, 等.中压切向涡流冷却的数值研究 [J]. 热力透平, 2009, 38(1): 39-42.

YANG Jiandao,ZHU Xiaocheng,YANG Jian,et al. Simulation study on tangential direction cooling in IP cylinder [J]. Thermal Turbine, 2009, 38(1): 39-42.

祁明旭, 杨建道, 周代伟, 等. 600 MW汽轮机高压漏汽对中压缸转子冷却及动叶根部流动特性的影响 [C]∥中国工程热物理学会学术会议. 北京:中国工程热物理学会, 2010: 092071.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation on the Heat Transfer Characteristics of Brush Seals

Heat Transfer and Pressure Drop Correlations for Rectangular Channels with Ribs

Heat Transfer Performance in Steam-Cooled U-Shaped Channel with Concave/Convex Structure

Numerical Simulation for Flow and Heat Transfer Characteristics in Steam-Cooled Square Ribbed Channel

Effects of Aerodynamic and Operational Parameters on Sealing Performance of Turbine Rim Seal

Related Author

李军

邱波

刘加增

徐亮

高建民

税琳棋

史晓军

杜长河

Related Institution

State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University

School of Energy and Power Engineering, Xi'an Jiaotong University

Xi'an TPRI Energy Conservation Technology Co., Ltd.

⁰