Self-Adaptive Iterative Method of Extracting Center of Linear-Structured Light Stripe

崔希君; 杨川; 刘保华; 李兵

您当前的位置：

首页 >

文章列表页 >

Self-Adaptive Iterative Method of Extracting Center of Linear-Structured Light Stripe

更新时间：2025-12-08

- Self-Adaptive Iterative Method of Extracting Center of Linear-Structured Light Stripe
- Vol. 41, Issue 1, Pages: 73-76(2007)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TN247;TP391
- Online First：10 January 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
崔希君, 杨川, 刘保华, et al. Self-Adaptive Iterative Method of Extracting Center of Linear-Structured Light Stripe[J]. 2007, 41(1): 73-76.
DOI：

崔希君, 杨川, 刘保华, et al. Self-Adaptive Iterative Method of Extracting Center of Linear-Structured Light Stripe[J]. 2007, 41(1): 73-76. DOI：

摘要

针对线结构光测量系统中如何提高光刀中心位置提取精度的问题

根据系统量传递理论

建立了线结构光截面强度的偏态分布分析模型

采用一种基于重心法的自适应迭代算法来提取光刀中心位置

并且分析了被曲面调制后的光刀强度分布变化对光刀中心位置提取精度的影响.分别对45°标准斜面和自由曲面进行了实验

并与阈值重心法、自适应阈值法进行了比较.实验结果表明

自适应迭代提取算法可以得到较稳定、更准确的光刀中心位置数据

精度可从50 μm提高到10 μm左右

并具有受外界干扰影响较小的特点

因此满足了线结构光测量系统的测量精度要求.

Abstract

Aiming at improving the precision of extracting the center position of the light stripe of the linear light measurement system

an abnormal distributing model of energy of light stripe section is established

where a self-adaptive iterative algorithmic is developed to extract the center position of the light stripe based on the centrobaric method. The modulated influence on the distribution of energy of light stripe resulting from the measured object surface is investigated. The tests with standard bevel of 45°and the free surface are conducted respectively. Compared with the center position gotten by centrobaric method and self-adaptive threshold method

it is found that the proposed method enables to extract the light stripe center position exactly and steadily to outperform with a precision of 10 μm and higher anti-interference capacity.

关键词

Keywords

references

李兵,罗意平,王昭,等. 多光刀三维轮廓快速测量方法研究[J].光子学报,2003,19(4):738-741.

Li Bing, Luo Yiping, Wang Zhao, et al. Study on the rapid measuring method of multi-light-knife for 3D profile[J]. Acta photonica Sinica, 2003,19(4):738-741.

解则晓,张成国,张国雄. 基于B样条迭代法的激光光条噪声去除技术研究[J].光学技术,2005,31(3):430-433.

Xie Zexiao, Zhang Chengguo, Zhang Guoxiong. Research on removing the noise on the laser stripe based on the iterative fitting of B_spline[J]. Optical Technique, 2005,33(3):430-433.

李和平,李德华,朱洲,等. 基于遗传算法的结构光条文中心检测方法[J].光学精密工程,2004,12(1):82-86.

Li Heping, Li Dehua, Zhu Zhou, et al. Detection of structured light strip center line based on genetic algorithm[J]. Optics and Precision Engineering, 2004,12(1):82-86.

随连生,李兵,蒋庄德. 基于NURBS曲线插值的激光光刀图像中心提取方法的研究[J]. 中国激光,2003,30(10):933-937.

Sui Liansheng, Li Bing, Jiang Zhuangde. Research on method of laser-knife center position extracting based on NURBS Interpolation[J]. Chinese Journal of Laser, 2003, 30(10):933-937.

解则晓,张成国,张国雄. 线结构光侧头的误差补偿[J].仪器仪表学报,2005,26(7):667-670.

Xie Zexiao, Zhang Chengguo, Zhang Guoxiong. Error compensation for structured light sensors[J]. Chinese Journal of Scientific Instrument, 2005, 26(7):667-670.

吴剑波,崔振,赵宏,等. 光刀中心自适应阈值提取法[J].半导体光电,2001,22(1):62-64.

Wu Jianbo, Cui Zhen, Zhao hong, et al. An adaptive threshold method for light-knife center acquisition[J]. Semiconductor Optoelectronics, 2001,22(1):62-64.

贺俊吉,张广军. 结构光三维视觉检测中光条图像处理方法研究[J].北京航空航天大学学报,2003,29(7):593-597.

He Junji, Zhang Guangjun. Study on method for processing image of strip in structured-light 3D vision measuring technique[J]. Journal of Beijing University of Aeronautics and Astronautics, 2003,29(7):593-597.

李继陶,苏显渝,李杰林,等. 激光散斑引起的象强度中心漂移的理论计算[J]. 光电工程,1996,23(4):32-39.

Li Jitao, Su Xianyu, Li Jielin, et al. Theoretical calculation for centroid shift of image due to laser speckle[J]. Opto-Electronic Engineering, 1996, 23(4):32-39.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

Mechanism and Optimal Control Strategy for Hysteresis in Rapid Dehumidification Response of Indirect Thermal Systems in Electric Vehicles

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

A Fast Calculation Method for Thermal Flow Fields in Transformer Windings Based on PI-DeepONet

Review of the Application of EBSILON Software in Combined Heat and Power System Optimization

Related Author

No data

Related Institution

No data

⁰