Numerical Simulation and Optimization of Humidity Field in Artificially Environmental Chamber

徐俊; 蒲亮; 厉彦忠; 吕婧

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation and Optimization of Humidity Field in Artificially Environmental Chamber

更新时间：2025-12-08

- Numerical Simulation and Optimization of Humidity Field in Artificially Environmental Chamber
- Vol. 41, Issue 1, Pages: 77-81(2007)
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU111
- Online First：10 January 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
徐俊, 蒲亮, 厉彦忠, et al. Numerical Simulation and Optimization of Humidity Field in Artificially Environmental Chamber[J]. 2007, 41(1): 77-81.
DOI：

徐俊, 蒲亮, 厉彦忠, et al. Numerical Simulation and Optimization of Humidity Field in Artificially Environmental Chamber[J]. 2007, 41(1): 77-81. DOI：

摘要

采用FLUENT离散相模型对环境室内水滴的蒸发过程仿真模拟.研究了喷入液滴直径、送风速度和送风温度对环境室内流场、湿度场的影响.计算结果表明:喷入液滴直径越小、送风温度越低时

湿度场的均匀性越好; 增大送风速度

湿度场能更快达到稳定.综合考虑经济性和湿度场均匀性

对于该计算模型

在送风温度为320 K、送风速度为18 m/s时得到最优的液滴直径为10 μm; 在送风温度为320 K、液滴直径为2 μm时得到最优送风速度为18 m/s.

Abstract

An efficient computational fluid dynamics(CFD)software

FLUENT

was employed for the simulation of evaporation process of water droplets in an artificially created environmental chamber with the discrete model. The flow and humidity fields in the chamber were investigated individually under various droplet diameter

inlet temperature and velocity. In the discrete model

the simulations of coupling particles with air were conducted using Lagrangian equation. The calculated results indicate that humidity meliorates with decreasing inlet temperature and droplet diameter. Moreover

the stabilizing time of the humidity field in the chamber is dependent on the inlet velocity. The humidity field becomes steady more easily with the increasing inlet velocity. In addition

in the chamber the optimal droplet diameter is 10 μm at an inlet temperature of 320 K and a velocity of 18 m/s

and the optimal inlet velocity is 18 m/s at an inlet temperature of 320 K for a droplet diameter of 2 μm.

关键词

Keywords

references

王浚,黄本诚,万才大,等.环境模拟技术[M].北京:国防工业出版社,1996:321-323.

Jiang Zheng, Moser A. Indoor airflow with cooling panel and radioactive/convective heat source[J]. ASHRAE Trans, 1992, 98(1):33-42.

Mohamed K, Paraschivoiu M. Real gas numerical simulation of hydrogen flow[C]∥2nd International Energy Conversion Engineering Conference. Providence: American Institute of Aeronautics and Astronautics Inc., 2004:727-740.

Stan C, Eichert H, Martorano L,et al. Fluid dynamic modeling of gasoline direct injection for compact combustion chambers[C]∥SAE Congress. Baltimore, M D: SAE Publication,1998:1-10.

Zhang Jianshun, Kanabus-Kaminska J M, Shaw C Y. Full-scale test chamber for material emission studies and indoor air quality modeling[J]. ASTM Special Technical Publication, 1996, 1287(1): 58-66.

Huh M Y, Kim J S, Ahn J P. IGC synthesis of tin nanophase particles, part I: study on convection gas currents in IGC chamber[J]. Powder Metallurgy, 2002, 2(45):154-159.

吴延鹏. 建筑材料和耐久性实验小型人工环境室设计[J].建筑热能通风空调, 2001(2):63-65.

Wu Yanpeng. The design of small-size artificial climate room for bridling materials and construction durability testing[J]. Building Energy and Environment, 2001(2):63-65.

陶文铨. 数值传热学[M].西安:西安交通大学出版社,2001:353-356.

鲁钟琪.两相流与沸腾换热[M].北京:清华大学出版社,2002:27-32.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Performance Analysis of Power Battery Cooling Systems under Different Transcritical CO2 Direct Cooling System Architectures

Performance Analysis of Power Battery Cooling System under Different Transcritical CO2 Direct Cooling System Architectures

Algorithms to calculate interface area and centroid based on the VOF model

Numerical Simulation for Flow Characteristics in Thermosyphon Elevation Tube with Lunate Channel

A Vapor-Liquid Phase Change Model for Two-Phase Boiling and Condensation

Related Author

CAO Feng

YIN Xiang

FANG Jianmin

CHEN Bin

JIA Fan

HAN Xu

YIN Xiang

CHEN Bin

Related Institution

Yuxin Automotive Thermal Management Technology Co., Ltd.

National Innovation Platform (Centre)for Industry-Education Integration of Energy Storage Technology, Xi'an Jiaotong University

Yuxin Automotive Thermal Management Technology Co

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

School of Human Settlement and Civil Engineering, Xi'an Jiaotong University

⁰