Errors Compensation Method for Multi-Linear Structured Light Sensor

刘保华; 李兵; 崔希君; 蒋庄德

您当前的位置：

首页 >

文章列表页 >

Errors Compensation Method for Multi-Linear Structured Light Sensor

更新时间：2025-12-08

- Errors Compensation Method for Multi-Linear Structured Light Sensor
- Vol. 41, Issue 1, Pages: 50-54(2007)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TH241
- Online First：10 January 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
刘保华, 李兵, 崔希君, et al. Errors Compensation Method for Multi-Linear Structured Light Sensor[J]. 2007, 41(1): 50-54.
DOI：

刘保华, 李兵, 崔希君, et al. Errors Compensation Method for Multi-Linear Structured Light Sensor[J]. 2007, 41(1): 50-54. DOI：

摘要

针对在多线结构光测量系统中光平面不等距和不平行引起测量误差的问题

提出了一种基于标准三角块的误差补偿方法.通过分析测量误差产生的原因

建立了光平面平行度、光平面间距与测量误差之间关系的数学模型

将测头产生的结构光条投射到一个标准三角块斜面上

利用三角块斜面的几何变换能力将光平面平行度、光平面间距的信息转换到系统可以进行精确测量的光平面当中.通过CCD采集和数学计算

可以得到准确的各光平面平行度和光平面间距的误差数据

并根据得到的误差数据对测得的原始数据进行补偿修正

由实验证明了该方法在对阵列式多线结构光测头结构误差补偿后

测量得到的数据精度可以提高约40%.

Abstract

Aiming at the errors due to un-equivalence and un-parallelism of light planes in the measuring system

an errors compensation method based on triangular standard piece is presented. Analyzing the error origin

the mathematical models of relationships of measuring errors with un-equivalence and un-parallelism of light planes are established

and the structured light stripes are projected on the slope of a triangular standard piece

the informations of un-equivalence and un-parallelism of light planes are converted into the light plane where the measuring system can measure accurately utilizing the ability of geometric conversion of slope of the triangular standard piece

the error data of un-equivalence and un-parallelism of light planes are obtained by CCD capture and mathematical calculation

and the measuring data are compensated according to the measured error data. An experiment verifies that the measuring accuracy can be improved by 40% as the structural errors of multi-linear structured light probe are compensated with the presented method.

关键词

Keywords

references

李兵, 罗意平, 王昭,等. 多光刀三维轮廓快速测量方法研究[J]. 光子学报, 2003, 36(6): 738-741.

Li Bing, Luo Yiping, Wang Zhao, et al. Study on the rapid measuring method of multi light-knife for 3D profile[J]. Acta Phot Sinica, 2003, 32(6):738-741.

解则晓, 张成国, 张国雄. 线结构光测头的误差补偿[J]. 仪器仪表学报, 2005, 26(7): 667-670.

Xie Zexiao, Zhang Chengguo, Zhang Guoxiong. Error compensation for structured light sensors[J]. Chinese Journal Scientific Instrument, 2005, 26(7): 667-670.

Zhang Jianxin, Djordijevich A. Study on laser stripe sensor [J]. SENS ACTUA, 1999, 72(3): 224-228.

Boverie S, Devy M, Lerasle F. Comparison of structured light and stereovision sensors for new airbag generations [J]. Control Engineering Practice, 2003, 11(12): 1413-1421.

Zhou Fuqiang, Zhang Guangjun. Complete calibration of a structured light stripe vision sensor through planar target of unknown orientations [J]. Image Vision Computing, 2005, 23(1): 59-67.

Yang Zaiming, Wang Y H. Error analysis of 3D shape construction from structured lighting [J]. Pattern Recognition,1996, 29(2): 189-206.

费业泰. 误差理论与数据处理[M]. 3版. 北京: 机械工业出版社, 1995: 14-20.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Configuration Design and Stiffness Characteristics Analysis of Metamorphic Hybrid Robot Arm Mechanism

Estimating Dynamic Stiffness of Coordinate Measuring Machine for Compensation of Acceleration Error

Compensation of Friction Error for X-Y Table

Error Analysis and Compensation of Linear Structured Light Scanning Probes

Modified Algorithm for Voltage Module Flux Estimation with Lowpass Filter

Related Author

LIU Rongqiang

GUO Hongwei

KOU Ziming

SHI Chuang

ZHANG Jing

WANG Qiaochu

郭俊杰 1

Related Institution

School of Mechanical Engineering, Taiyuan University of Technology

School of Mechanical Engineering, Yanshan University

Hebei Innovation Center for Equipment Light Weight Design and Manufacturing

School of Mechatronics Engineering, Harbin Institute of Technology

State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University

⁰