Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle

王乐; 赵远扬; 李连生; 束鹏程

您当前的位置：

首页 >

文章列表页 >

Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle

更新时间：2025-12-08

- Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle
- Vol. 41, Issue 5, Pages: 598-601(2007)
- 作者机构：
  
  西安交通大学流体机械及压缩机国家工程研究中心,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： TH45
- Online First：10 May 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
王乐, 赵远扬, 李连生, et al. Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle[J]. 2007, 41(5): 598-601.
DOI：

王乐, 赵远扬, 李连生, et al. Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle[J]. 2007, 41(5): 598-601. DOI：

摘要

针对基于等β角对称圆弧型线的涡旋压缩机建立了通用的几何模型

推导出了修正部分的工作腔容积、吸气孔口面积、泄漏线长度和工作腔换热面积随转角变化的计算公式

并假定修正部分的泄漏线为渐开线

起始展开角为涡旋线的起始展开角.通过解析几何的方法求取排气孔口和轴向力作用面积的各个顶点坐标

并沿其边界积分

从而精确地计算出它们的面积.所建立的通用几何模型可直接用于涡旋压缩机热力和动力模型的计算

为优化设计奠定了基础

运用通用几何模型对一台样机进行热力和动力计算

得到了合理的计算结果.

Abstract

Comprehensive and systematic analysis on geometric model of scroll compressors was conducted on the basis of perfect meshing profile. Equations for calculating volume of working chambers

suction port area

length of leakage lines

and heat transfer area with respect to the orbiting angle were derived. Leakage line was assumed to be involute whose starting angle equals that of the scroll line. The coordinate of vertices was computed by analytic method and the discharge port area and compact area of axial force were calculated precisely by integrating along the boundaries. In addition

the geometric model was applied to simulate a prototype of scroll compressor and reasonable results were obtained.

关键词

Keywords

references

冯诗愚,顾兆林,李云. 涡旋机械的涡旋体始端型线研究 [J].西安交通大学学报,1998,32(11):88-92.

Feng Shiyu,Gu Zhaolin,Li Yun. Study on top profile for scroll fluid machines [J]. Journal of Xi'an Jiaotong University,1998,32(11):88-92.

高秀峰,刘卫华,冯诗愚,等. 涡旋齿端等β角圆弧类型线修正理论的研究 [J].西安交通大学学报,2001,35(7):750-754.

Gao Xiufeng,Liu Weihua,Feng Shiyu, et al. Theoretical study on modification of top profile based on arc shaped curves with equal beta angle for scroll fluid machinery [J]. Journal of Xi'an Jiaotong University,2001,35(7):750-754.

高秀峰, 冯诗愚, 顾兆林.等β对称圆弧修正齿型涡旋压缩机排气孔的开设分析 [J]. 西安交通大学学报,2000,34(6): 89-92.

Gao Xiufeng,Feng Shiyu,Gu Zhaolin.Discharge port for scroll fluid machinery with symmetric arc-shaped top wrap [J]. Journal of Xi'an Jiaotong University,2000,34(6):89-92.

高秀峰.涡旋压缩机型线修正及排气孔研究 [D].西安:西安交通大学能源与动力工程学院,2000.

Chen Yu, Halm N, Groll E, et al. Mathematical modeling of scroll compressors-part I: compression process modeling [J]. International Journal of Refrigeration, 2002, 25(6): 731-750.

Kim Y C, Seo K J, Park H H. Modeling on the performance of an inverter driven scroll compressor [C]∥Proceedings of the International Compressor Engineering Conference. West Laffette, USA: Purdue University, 1998:755-760.

Lee G H. Performance simulation of scroll compressors [J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2002, 216(2): 169-180.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on Scroll Refrigeration Compressor with External Cooling

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

A Fast Calculation Method for Thermal Flow Fields in Transformer Windings Based on PI-DeepONet

Effects of Steam Addition on the Swirl Combustion and Emission Characteristics of Cracked Ammonia

Windage Loss and Flow Characteristics in Impeller Back Gaps of sCO2 Radial Inflow Turbines

Related Author

孙帅辉 1

赵远扬 1

王智忠 1

马瑞 2

李连生 3

Related Institution

School of Energy and Power Engineering, Xi'an Jiaotong University

⁰