Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet

谭富星; 李明哲; 蔡中义; 孙刚

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet

更新时间：2025-12-08

- Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet
- Vol. 41, Issue 9, Pages: 1026-1030(2007)
- 作者机构：
  
  吉林大学无模成形技术开发中心,长春,130025
- 作者简介：
- 基金信息：
- DOI：
  CLC： TG385.1
- Online First：10 September 2007，
  
  Published：2007
- 稿件说明：
移动端阅览
谭富星, 李明哲, 蔡中义, et al. Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet[J]. 2007, 41(9): 1026-1030.
DOI：

谭富星, 李明哲, 蔡中义, et al. Numerical Simulation of Wrinkling in Multi-Point Forming Process of Titanium Alloy Retiary Sheet[J]. 2007, 41(9): 1026-1030. DOI：

摘要

采用动态显式有限元软件

针对不同厚度、不同曲率半径的带孔网板和无孔板球形面的无压边多点成形过程进行了数值模拟.模拟结果表明

在相同的成形条件下

带孔网板成形球形件时不易起皱

成形效果较好.分析表明

带孔网板成形时不易起皱的原因是网孔吸收了部分金属变形

从而减小了网板起皱的趋势.通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线.实验结果表明

模拟结果与实验结果吻合良好

且满足与不起皱成形极限图的对应关系.

Abstract

The multi-point forming(MPF)processes of spherical surface parts of titanium alloy sheet and retiary sheet with different thickness and curvature radius are simulated via an explicit finite element software. The simulation results show that the spherical surface parts formed with retiary metal sheet is not prone to wrinkle under the same condition

and better quality parts can be acquired. The analysis indicates that the non-wrinkling effect of retiary metal sheet lies in the absorption of sheet deformation via its holes. A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained. A forming test is conducted

and the results coincide well with the simulations and conform to the non-wrinkling limited graph.

关键词

Keywords

references

陈伟强,杨应明.颅骨缺损修复的展望[J]. 汕头大学医学院学报,2001,14(2):154-156.

Chen Weiqiang, Yang Yingming. Expectations for mending absent crania [J]. Journal of Shantou University Medical College, 2001, 14(2): 154-156.

谭富星,李明哲,钱直睿. 钛合金颅骨修复体的多点成形数值模拟[J]. 吉林大学学报(工学版),2006,36(6):851-855.

Tan Fuxing, Li Mingzhe, Qian Zhirui. Numerical simulation on the process of multi-point forming for titanium alloy cranial prosthesis [J]. Journal of Jilin University: Engineering and Technology Edition, 2006, 36(6): 851-855.

Li M Z, Cai Z Y, Sui Z, et al. Multi-point forming technology for sheet metal parts [J]. Journal of Materials Processing Technology, 2002, 129(1/3): 333-338.

蔡中义,李明哲,付文智.板材多点成形中压痕缺陷的分析与控制[J]. 锻压技术,2003,28(1):16-19.

Cai Zhongyi, Li Mingzhe, Fu Wenzhi. Analysis and control of dimpling in multi-point forming for sheet metal [J]. Forging Stamping Technology, 2003, 28(1): 16-19.

吴勇国,李尚健,董湘怀. 薄壳单元有限元方程及其在板料成形中的应用[J]. 华中理工大学学报,1994,22(2):124-127.

Wu Yongguo, Li Shangjian, Dong Xianghuai. A finite element equation with Kirchhoff shell element and its application in sheet metal forming [J]. Journal of Huazhong University of Science and Technology, 1994, 22(2): 124-127.

李明哲,李淑慧,柳泽,等.板材多点成形过程起皱现象数值模拟研究[J].中国机械工程,1998,9(10):34-38.

Li Mingzhe, Li Shuhui, Liu Ze, et al. Numerical simulation of winkles and studying in multi-point forming of sheet metal[J]. China Mechanical Engineering, 1998, 9(10): 34-38.

陈喜娣,蔡中义,李明哲,等.板材无压边多点成形中起皱数值模拟[J].农业机械学报,2005,36(4):330-333.

Chen Xidi, Cai Zhongyi, Li Mingzhe, et al. Numerical simulation of wrinkling in multi-point forming for sheet metal without blank holder[J]. Transactions of the Chinese Society of Agricultural Machinery, 2005,36(4): 330-333.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of the Mechanism of Electrostatic Accumulation and Current Density Distribution Characteristics During Liquid Hydrogen Pipeline Transportation

Numerical Simulation of Space Charge Distribution Characteristics of Polyimide Materials under X-Ray Irradiation

Numerical Simulation Study on Geothermal Extraction Characteristics of Supercritical CO2 in Heterogeneous Fractures

Action Mechanism of Heat Transfer between the Working Medium and the Impeller on Aerodynamic Performance and Flow Characteristics of Radial Inflow Turbines with Supercritical Carbon Dioxide

Analysis of the Attached Vortex Model for the Flow Characteristics of Wing Near-Field Wakes

Related Author

SUN Wenhao

LIU Hongbao

WANG Lei

QING Ziyou

LI Zhuolun

MA Yuan

LI Yanzhong

ZHONG Hui

Related Institution

School of Energy and Power Engineering，Xi’an Jiaotong University

Aerospace System Engineering Shanghai

School of Electrical Engineering，Xi’an Jiaotong University

Northwest Institute of Nuclear Technology

Institute of Electronic Engineering，China Academy of Engineering Physics

⁰