Numerical Optimization of Volute Outlet Structure for Forward-Curved Centrifugal Fan

您当前的位置：

首页 >

文章列表页 >

Numerical Optimization of Volute Outlet Structure for Forward-Curved Centrifugal Fan

更新时间：2025-07-09

- Numerical Optimization of Volute Outlet Structure for Forward-Curved Centrifugal Fan
- Vol. 43, Issue 5, Pages: 61-65(2009)
- 作者机构：
  
  西安交通大学动力工程多相流国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： O355;TB53
- Online First：10 May 2009，
  
  Published：2009
- 稿件说明：
移动端阅览
Numerical Optimization of Volute Outlet Structure for Forward-Curved Centrifugal Fan[J]. 2009, 43(5): 61-65.
DOI：

Numerical Optimization of Volute Outlet Structure for Forward-Curved Centrifugal Fan[J]. 2009, 43(5): 61-65. DOI：

摘要

对某前向离心风机内部三维非定常流动进行了数值计算

重点研究了蜗壳出口的3个结构参数——蜗壳出口扩张角、叶轮的露出长度以及蜗舌间隙对风机气动性能及气动噪声的综合影响.通过响应面方法对数值结果进行二次回归拟合

得到3个结构参数与风机效率和A声级间的函数关系

并进行了优化分析.数值结果表明:叶轮露出长度和蜗舌间隙对风机效率和A声级影响较为显著

通过优化能够在保持风机效率基本不变的情况下使A声级降低9.4 dB.将可靠的CFD数值技术与响应面方法结合起来用于指导离心风机的改进及试验设计是可行的.

Abstract

A numerical optimum study on three-dimensional unsteady viscous flow in a centrifugal fan with forward-curved blades was performed. The influence of the outlet angle of the volute

the bare length of the impeller and the cutoff clearance on aerodynamic performance and aerodynamic noise of the centrifugal fan was analyzed concerning the whole impeller-volute configuration. The correlations of the fan efficiency and A-weighted sound pressure level with the three parameters were obtained by quadratic polynomial regression with the response surface methodology(RSM). The results show that the bare length of the impeller and the cutoff clearance affect the fan efficiency and A-weighted sound pressure level significantly. Moreover

A-weighted sound pressure level decreases by 9.4dB with the three parameters optimized while in this case the fan efficiency only decreases slightly. The method of reliable CFD technique in combination with RSM can be effectively applied to the improvement and experiment design of centrifugal fans.

关键词

Keywords

references

LIU Qiuhong, QI Datong, MAO Yijun. Numerical calculation of centrifugal fan noise [J]. Proceedings of the Institution of Mechanical Engineers:Journal of Mechanical Engineering Science, 2006, 220(8): 1167-1178.

刘秋洪. 离心通风机气动噪声数值分析方法的研究及工程应用[D]. 西安:西安交通大学能源与动力工程学院, 2007.

毛义军,祁大同,刘秋洪. 基于非定常流场的离心风机气动噪声分析[J]. 西安交通大学学报, 2005, 39(9): 123-127.

MAO Yijun, QI Datong, LIU Qiuhong. An analysis of the aeroacoustic source and noise type of a centrifugal fan based on the unsteady flow [J]. Journal of Xi'an Jiaotong University, 2005, 39(9): 123-127.

LIU Qiuhong, QI Datong, TANG Hongtao. Computation of aerodynamic noise of centrifugal fan using LES approach, acoustic analogy and vortex sound theory [J]. Proceedings of the Institution of Mechanical Engineers:Journal of Mechanical Engineering Science, 2007, 221(11): 1321-1332.

SASAKI S, HATAKEYAMA M, KODAMA Y, et al. An experiment study of the flow at impeller outlet and the noise of dual-cascade centrifugal fan(effect of bare ratio and outlet angle of scroll casing)[J]. Reports of the Faculty of Engineering,2002, 32(59): 25-32.

KODAMA Y, SHINBARA N, HAYASHI H, et al. Aerodynamic characteristics of multiblade radial flow fan(effects of the bare length and the divergent angle at the outlet of the scroll casing)[J]. Reports of the Faculty of Engineering,1998, 28(50): 21-28.

HAN Y, MAENG J S, YOO D H. Shape optimization of cutoff in a multi-blade fan/scroll system using response surface methodology [J]. Numerical Heat Transfer: Part B, 2003, 43(1): 87-98.

KIM K Y, SEO S J. Application of numerical optimization technique to design of forward-curved blades centrifugal fan [J]. Numerical Heat Transfer: Part B, 2006, 49(1): 152-158.

王晓锋,席光,王尚锦. 响应面方法在叶片扩压器优化设计中的应用研究[J]. 工程热物理学报, 2003, 24(3): 391-394.

WANG Xiaofeng, XI Guang, WANG Shangjin. Application of response surface methodology in the optimization design of vaned diffuser [J]. Journal of Engineering Thermophysics, 2003, 24(3): 391-394.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on the Aerodynamic Performance and Noise of Annular Impeller Axial Fans

Numerical and Experimental Study on Effect of Volute Width on Aerodynamic Noise of a Centrifugal Fan

Machine Learning-Assisted Optimization of Generalized k-ω Turbulence Model for Transonic Compressor Rotors

Influence of Bionic Front Grille Inspired by Long-Eared Owl Wing on Performance of Circulation Fan with Annular Impeller

Numerical and Experimental Study on the Effects of Curved Volute on the Aerodynamic Noise of Multi-Blade Centrifugal Fans

Related Author

WU Xianpeng

WEI Lai

LUO Dan

KANG Ruixiang

LIU Xiaomin

刘晓良

祁大同

马健峰

Related Institution

School of Energy and Power Engineering, Xi'an Jiaotong University

Guangdong Midea Environmental Electrical Appliance Manufacturing Co., Ltd.

LIU Xiaoliang, QI Datong, MA Jianfeng, YUAN Minjian, QIU Chang'an (School of Energy and Power Engineering, Xi'an Jiaotong University

GD Midea Environmental Electrical Appliance MFG Co., Ltd.

美的集团厨房和热水事业部，528311，广东佛山Midea Group Kitchen and Hot Water Division, Foshan, Guangdong 528311, China

⁰