Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact

更新时间：2025-07-09

- Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact
- Vol. 42, Issue 11, Pages: 1435-1440(2008)
- 作者机构：
  
  西安交通大学能源与动力工程学院,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： O353.4
- Online First：10 November 2008，
  
  Published：2008
- 稿件说明：
移动端阅览
Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact[J]. 2008, 42(11): 1435-1440.
DOI：

Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact[J]. 2008, 42(11): 1435-1440. DOI：

摘要

为了研究液固撞击的机理

采用光滑粒子流体动力学方法(SPH)与有限单元法(FEM)建立了考虑流固耦合效应的高速液固撞击数值模型

详细分析了直径为2 mm、撞击速度为1 000 m/s的液滴和射流对有机玻璃(PMMA)的三维撞击和破坏状况.分析表明:射流与液滴在撞击初始时刻的前缘变形和内部压力分布几乎是完全相同的; 液滴撞击固体的最大压力值出现在0.20 μs时

但此时材料内部最大等效应力只有104 MPa

材料还不足以发生破坏; 产生于液固撞击瞬时后0.32 μs、速度高达2 925 m/s的侧向射流是使固体表面产生破坏的主要原因

因此撞击最初的破坏位于以撞击中心为圆心的一个圆环区域处.所得材料表面损伤情况与Brunton的实验数据吻合良好

证明了数值模型的可行性和精确性.

Abstract

The numerical model for high speed liquid-solid impact considering fluid-structure interaction coupling effect was developed based on smoothed particle hydrodynamics(SPH)and finite element method(FEM). The damage of polymethylmethacrylate(PMMA)

caused by a single droplet and a jet impact with a radius of 2 mm and a speed of 1 000 m/s

was analyzed. The numerical results show that the distortion and interior pressure of the droplet and the jet are almost the same at the beginning of impact. The maximum pressure inside the droplet occurs at 0.20 μs after impact

and the maximum equivalent stress inside solid is only 104 MPa which can not lead to material damage. It is mainly the inclined jet which has a speed of 2 925 m/s and occurs at 0.32 μs that causes the material surface damage. The initial damage by impact is located in a circular region whose center is the impact position. The material surface damage predicted by the numerical simulation shows good agreement with the experimental data of Brunton.

关键词

Keywords

references

BOWDEN F P, FIELD J E. The brittle fracture of solids by liquid impact, by solid impact and by shock [J]. Proc R Soc London: Ser A, 1964, 282(1390): 331-352.

BRUNTON J H. High speed liquid impact [J]. Mathematical and Physical Science, 1966, 260(1110): 79-85.

COOK S S. Erosion by water harmer [J]. Proc R Soc London: Ser A, 1928, 199(783): 481-488.

ROCHESTER M C, BRUNTON J H. Pressure distribution during drop impact [C]∥ Proceedings of the 5th International Conference on Erosion by Liquid and Solid Impact. Cambridge, UK: Cavendish Laboratory, 1979:6.1-6.7.

KOROBKIN A A. Asymptotic theory of liquid-solid impact [J]. Philos Trans R Soc London: Ser A, 1997, 355: 507-522.

KENNEDY C F, FIELD J E. Damage threshold velocities for liquid impact[J]. Journal of Materials Science, 2000, 35(21):5331-5339.

HALLER K K, VENTIKOS Y, POULIKAKOSA D. Computational study of high-speed liquid droplet impact [J]. Journal of Applied Physics, 2002, 92(5): 2821-2828.

施红辉,俞茂铮,蔡颐年. 一个新的关于液滴与固体表面高速碰撞的力学模型 [M]∥ 多相流与传热论文集. 北京:原子能出版社, 1989:98-105.

毛靖儒,施红辉,俞茂铮,等. 液滴撞击固体表面时的流体动力特性实验研究 [J]. 力学与实践,1995,17(3)52-54.

MAO Jingru, SHI Honghui, YU Maozheng, et al. et al. The experimental study of the hydrodynamic behavior during liquid solid impact [J]. Mechanics in Engineering, 1995,17(3):52-54.

施红辉,FIELD J E. 高速液体撞击下固体材料内的应力波传播 [J]. 中国科学:G辑, 2004, 34(5): 577-590.

SHI Honghui, FIELD J E. Stress wave propagation in high speed liquid solid impact [J]. Science in China: Ser G, 2004, 34(5):577-590.

孙弼,鄢宇鹏,张荻,等. 液滴与可变形固面撞击的二维非线性激波模型 [J]. 应用力学学报, 1996,13(3): 33-38.

SUN Bi, YAN Yupeng, ZHANG Di, et al. A two dimensional nonlinear shock model for the collision between a liquid drop and elastic plane [J]. Chinese Journal of Applied Mechanics, 1996,13(3): 33-38.

张荻,周屈兰,谢永慧,等. 液固撞击的非线性波动模型的研究 [J]. 西安交通大学学报, 2002,36(11): 1138-1142.

ZHANG Di, ZHOU Qulan, XIE Yonghui, et al. Study on nonlinear wave model of liquid solid impact [J]. Journal of Xi'an Jiaotong University, 2002,36(11): 1138-1142.

张荻,谢永慧,周屈兰. 液滴与弹性固体表面撞击过程的研究 [J]. 机械工程学报, 2003,39(6): 75-85.

ZHANG Di, XIE Yonghui, ZHOU Qulan. Study on the impact between liquid drop and elastic solid [J]. Chinese Journal of Mechanical Engineering, 2003,39(6):75-85.

LUCY L B. A numerical approach to the testing of the fission hypothesis [J]. The Astronomical Journal, 1977, 82:1013-1024.

GINGOLD R A, MONAGHAN J J. Smoothed particle hydrodynamics: theory and applications to non-spherical stars [J]. Monthly Notices of the Royal Astronomical Society, 1977,181: 375-389.

CHEN J K, BERAUN J E. A generalized smoothed particle hydrodynamics method for nonlinear dynamic problems [J]. Computer Methods in Applied Mechanics and Engineering, 2000,190(1/2):225-239.

CLEARY P W, PRAKASH M, HA J. Novel applications of smoothed particle hydrodynamics(SPH)in metal forming [J]. Journal of Materials Processing Technology, 2006,177:41-48

FANG Jiannong, OWENS R G. A numerical study of the SPH method for simulating transient viscoelastic free surface flows [J]. Journal of Non-Newtonian Fluid Mechanics, 2006,139(1/2): 68-84.

LIU M B. Smoothed particle method [M]. Singapore: World Scientific, 2003:39-40.

马逸尘,梅立泉,王阿霞,等. 偏微分方程的现代数值方法 [M]. 北京: 科学出版社,2006:2-3.

陶文铨. 数值传热学 [M]. 2版. 西安: 西安交通大学出版社,2005: 34-35.

张海涛. 弹塑性有限变形摩擦接触问题的有效数值解法研究及计算软件研制 [D]. 西安:西安交通大学能源与动力工程学院,1990.

景思睿,张鸣远. 流体力学 [M]. 西安: 西安交通大学出版社, 2006:295.

王文广. 塑料材料的选用 [M]. 北京: 化学工业出版社,2007.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Conversion of 3D Distorted Finite Elements into SPH Particles During Impact Dynamic Deformation

Numerical Simulation of Dynamic Behavior of Impact Between Liquid Droplet and Semi-Infinite Solid in Air

A Fluid-Structure Coupling Algorithm Based on Finite Element Method for Precise Analysis of Transonic and Supersonic Panel Flutter

Aero-Engine Fan Blade Vibration Characteristic Analysis

Tooth Contact Analysis of Spiral Bevel Gears Considering Edge Contact with Finite Element Method

Related Author

高巍然

强洪夫

张志春

蓝吉兵

张荻

韩永强

张家忠 1

梅冠华 1

Related Institution

Staff Room 201,Xi'an Hi-Tech Institute

State Key Laboratory of Engines, Tianjin University

School of Mechanical Engineering, Northwestern Polytechnical University

大连理工大学船舶工程学院辽宁省深海浮动结构工程实验室

State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University

⁰