氨-水和氨-水-溴化锂在吸收式制冷机中的对比实验研究

您当前的位置：

首页 >

文章列表页 >

氨-水和氨-水-溴化锂在吸收式制冷机中的对比实验研究

更新时间：2025-07-09

- 氨-水和氨-水-溴化锂在吸收式制冷机中的对比实验研究
- Issue 3, Pages: 46-49+69(2009)
- 作者机构：
  
  西安交通大学能源与动力工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC： TB651
- Online First：10 March 2009，
  
  Published：2009
- 稿件说明：
移动端阅览
[J]. 2009, (3): 46-49+69.
DOI：

[J]. 2009, (3): 46-49+69. DOI：

摘要

通过吸收式制冷实验

对比研究了溴化锂对于氨水吸收式系统性能的影响

包括浓溶液发生过程气-液相平衡特性和系统性能系数的变化.测定了氨-水-溴化锂三元吸收式系统发生过程中的温度-压力关系

计算了系统的性能系数.温度范围从15℃到80℃

压力达1.5 MPa.实验采用了3组溶液:A(X(NH3)=48%)

B(X(NH3)=51.8%

X(LiBr)=42%)

C(X(NH3)=58.7%

X(LiBr)=42%).对比发现

溶液B、C的发生压力分别比相同氨含量的二元溶液下降了约21%和30%

且发生温度越高

发生压力降幅就越大.采用溶液A时系统的性能系数为0.242

而采用溶液B、C时性能系数分别为0.293和0.334

分别提高了17.2%和33.6%.因此

在氨水吸收式制冷机中加入溴化锂可以明显提高机组的性能系数.

Abstract

Absorption refrigeration experiment was conducted to find the influences of lithium bromide on the performance of an absorption system with ammonia-water working pair

including variation of vapor-liquid equilibrium property and coefficient of performance(COP)of the system. The relationship between temperature and pressure of the ternary ammonia-water-lithium bromide solution in generation process and COP of the system were determined in the range of 15-80 ℃ and up to 1.5 MPa. Three types of solutions

A(X(NH

)=48%)

B(X(NH

)=51.8%

X(LiBr)=42%)

and C(X(NH

)=58.7%

X(LiBr)=42%)

were adopted in the experiment. The results showed that the generation pressure of the solutions B and C decreased by 21% and 30%

respectively

compared with that of the binary solution with the same NH

concentration. The pressure reduction increased with the increase of the generat

ion temperature. In addition

the COP of the system with B and C was 0.293 and 0.334

17.2% and 33.6% greater than that with A

respectively.

关键词

Keywords

references

{"db_type":"CJFDREF","db_name":"期刊","reference_articles":[{"unit":"流体机械","flag":"[J]","issue":"08","year":2001,"author":"王珍涛,徐士鸣,陈石,向平","index":1,"title":"两级复合吸收式制冷循环研究"},{"unit":"流体机械","flag":"[J]","issue":"02","year":1999,"author":"徐士鸣","index":2,"title":"吸收式制冷循环及制冷工质研究进展(Ⅰ)——高性能系数吸收制冷(热泵)循环"}],"articles_count":2}

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Sensitivity Analysis of Foil Geometrical Parameters for the Third-Generation CO2 Gas Foil Bearings Based on Design of Experiments Method

Numerical Simulation of the Energy Conversion Process in Thermoacoustic Engines with Different Stack Materials

I/O Performance Modeling and Prediction Method for Large-Scale Parallel Applications Using Machine Learning

Energy Efficiency Optimization of the Cryogenic Air Separation Process for Electronic-Grade Ultra Pure Nitrogen

Effects of Steam Addition on the Swirl Combustion and Emission Characteristics of Cracked Ammonia

Related Author

No data

Related Institution

No data

⁰