A flat plate separation flow with a diffusive upper wall was designed to simulate the boundary layer separation of a low pressure turbine cascade suction surface. Large eddy simulation with the dynamic Smagorinsky model was adopted to investigate flow dynamics and separation control effectiveness of a dimple under adverse pressure gradient on the flat plate. The effect of different ratio of leading edge boundary layer thickness to depth(R=0.378
0.994
1.453)on dimple flow dynamics and control effectiveness was investigated. The results show that the horseshoe vortex is the leading factor in the dimple flow dynamics for all three cases. Periodical shedding of the horseshoe vortex forms hairpin vortex lines arranged in dimple wake. The legs of the hairpin vortex are adjacent to the boundary layer and form streamwise vortex. In addition
the streamwise vortices absorb main stream high kinetic energy fluid into the boundary layer and augment the energy of the boundary layer. It appears that the horseshoe vortex and hairpin vortex lines are most effective to the suppression of boundary layer separation.
关键词
Keywords
references
VOLINO R J. Passive flow control on low-pressure turbine airfoils[J]. ASME Journal of Turbomachinery, 2003, 125(4):754-764.
BONS J P, SONDERGAARD R, RIVIR R B. Turbine separation control using pulsed vortex generator jets[J]. ASME Journal of Turbomachinery, 2001, 123(2):198-206.
Bons J P, SONDERGAARD R, RIVIR R B. Control of low pressure turbine separation using vortex generator jets [C]∥37th AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA, USA: AIAA, 1999:367.
VOLINO R J. Separation control on low-pressure turbine airfoils using synthetic vortex generator jets[J]. ASME Journal of Turbomachinery, 2003,125(4):765-777.
HUANG Junhui, THOMAS C C, THOMAS F O. Plasma actuators for separation control of low-pressure turbine blades [J]. AIAA Journal, 2006,44(7):1477-1487.
SUZEN Y B, HUANG P G. Simulations of flow separation control using plasma actuators [C]∥44th AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA, USA: AIAA, 2006:877.
BLOXHAM M, REIMANN D, CRAPO K. Synchronizing separation flow control with unsteady wakes in a low-pressure turbine cascade[J]. ASME Journal of Turbomachinery, 2009,131(2):021019.
ZHANG Man, QIAO Weiyang. Numerical simulation of vortex generator jets for low-pressure turbine separation control [J]. Journal of Propulsion Technology, 2008,29(1):67-74.
CHEN F, TANG Y P, CHEN M Z. An experimental investigation of loss reduction with riblets on cascade blade surface and isolated airfoils [C]∥ASME Turbo Expo. New York, NY, USA: ASME, 1990:207.
LAKE J P, KING P I, RIVIR R B. Reduction of separation losses on a turbine blade with low Reynolds number [C]∥37th AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA, USA: AIAA, 1999:242.
LAKE J P, KING P I, RIVIR R B. Low Reynolds number loss Reduction on turbine blades with dimples and V-grooves[C]∥38th AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA, USA: AIAA, 2000:738.
CASEY J P, KING P I, SONDERGAARD R. Parameterization of boundary layer control dimples on a low pressure turbine blade [C]∥40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Reston, VA, USA: AIAA, 2004:3570.
QIAO Weiyang, WANG Zhanxue, YI Jinbao. Control of separation losses on turbine blade with low Reynolds number [J]. Journal of Propulsion Technology, 2005,26(1):42-45.
VOLINO R J, HULTGREN L S. Measurements in separated and transitional boundary layers under low-pressure turbine airfoil conditions [J]. ASME Journal of Turbomachinery, 2001,123(3):609-613.
Study on the Special Vortical Structure Development During Flow Separation Control by VGJs in Boundary Layer of Flat Plate with Adverse Pressure Gradient
Large Eddy Simulation of Flow Resistance and Heat Transfer Characteristics of Dual-Swirl Cooling on Turbine Blade Leading Edge
Research on the Thermal Mixing Mechanism of Fluids in a Circular T-Junction under Multi-Force Field Coupling Conditions
Study on Effects of Double-Arc Non-Uniform Blades on the Flow Control and Aerodynamic Performance of Multi-Blade Centrifugal Fan
Research on Film Cooling Characteristics of Trailing Edge Cutback with Dimples
Related Author
张荻 1
樊涛 2
蓝吉兵 1
谢永慧 1
LI Jun
LIU Xuebin
SONG Liming
YU Boyang
Related Institution
Midea Group Kitchen and Hot Water Division
School of Energy and Power Engineering, Xi’an Jiaotong University
(School of Energy and Power Engineering, Xi'an Jiaotong University,,)
Shanghai Electric Power Generation Equipment Co. Ltd.
Faculty of Infrastructure Engineering, Dalian University of Technology