Aiming at the demerit of the gradient projection method and numerical optimization methods as performing additional work at displacement level
a novel two-step strategy of motion planning for redundant manipulators from the perspective of self-motion manifold is proposed
where a precise posture tracking of the end-effector is carried out by employing non-redundant joint
then the redundant joint is adjusted with the gradient of additional work on redundant joint displacement
and the additional work is performed via the self-motion of manipulator. The simulation result shows that this method can remarkably accelerate the solution process while performing the main task and additional task in a more efficient manner to suit the case of the additional work at the displacement level for redundant manipulator.
ZU Di,WU Zhenwei,TAN Dalong. Efficient inverse kinematic solution for redundant manipulators [J]. Chinese Journal of Mechanical Engineering, 2005, 41(6):71-75.
MAYORGA R V, SANDEEP C. A neuro-fuzzy approach for the motion planning of redundant manipulators [C]∥2006 International Joint Conference on Neural Networks. Piscataway, NJ, USA:IEEE, 2006: 16-21.
KOKER R I. Reliability-based approach to the inverse kinematics solution of robots using Elman's networks [J]. Engineering Applications of Artificial Intelligence, 2005, 18(3):685-693.
ZERGEROGLU E, SAHIN H, OZBAY U. Robust tracking control of kinematically redundant robot manipulators subject to multiple self-motion criteria [J]. Robotica, 2008, 26(6): 711-728.
YE Ping, SUN Hanxu, JIA Qingxuan. Study on kinematics optimization of redundant manipulators [C]∥2006 IEEE Conference on Robotics, Automation and Mechatronics. Piscataway, NJ,USA:IEEE Computer Society, 2006:1-6.
MULLER A. Collision avoiding continuation method for the inverse kinematics of redundant manipulators [C]∥Proceedings of the 2004 IEEE International Conference on Robotics and Automation. New Orleans, USA: IEEE Robotics and Automation, 2004:1593-1598.
ZHAO Jianwen, DU Zhijiang, SUN Lining. Self-motion manifolds of a 7-DOF redundant robot arm [J]. Chinese Journal of Mechanical Engineering, 2007, 43(9):132-137.