To eliminate the boride network in high boron cast ferroalloy
the combined process of forging with heat treatment is adopted. The prepared samples are analyzed by using scanning electron microscope
transmission electron microscopy
and X-ray diffraction. The results show that forging breaks up the boride network and leads to uniform distribution of boride in matrix. During subsequent heat treatment
spheroidized boride is able to be obtained. The hardness of the high boron cast ferroalloy treated with the combined process increases from HRC 51.4 to HRC 54.7
while the toughness increases evidently from 5 J/cm
2
to 107 J/cm
2
and the fracture morphology changes from brittle manner to toughness manner.
关键词
Keywords
references
本溪钢铁公司第一炼钢厂.硼钢[M].北京:冶金工业出版社,1977.
BAARMAN M H. Effect of boron additions on continuous cast low-carbon steel wire [J]. Scandinavian Journal of Metallurgy, 1998,27(4):148-158.
GUO Changqing, GAO Shouzhong. New Fe-base wear-resistant material FCB alloys [J]. Foundry, 2004,53(10):761-764.
LIU Zhongli, CHEN Xiang, LI Yanxiang, et al. Effect of chromium on microstructure and properties of high boron white cast iron [J]. Metallurgical and Materials Transactions: A, 2008,39(3):636-641.
GUO Changqing, WANG Caidong, LIU Xiaoping, et al. Effect of variable heat treatment modes on microstructures of Fe-Cr-B cast iron alloy [J]. China Foundry, 2008,5(1):28-31.
FU Hanguang, XIAO Qiang, KUANG Jiacai, et al. Effect of rare earth and titanium additions on the microstructures and properties of low carbon Fe-B cast steel [J]. Materials Science and Engineering: A, 2007,466(1/2):160-165.
CHAKRABARTI A K, SARKHEL S, GHOSH S. Forging white cast iron [J]. Transactions of the Indian Institute of Metals, 1980,33(6):467-472.
MA Qian, LIU Baicheng, WANG Zhaochang. Breakup of eutectic carbide network of white cast irons at high temperatures [J]. Journal of Materials Science, 1995,30(13):3383-3386.
DI Hongshuang, ZHANG Xiaoming, WANG Guo-dong, et al. Spheroidizing kinetics of eutectic carbide in the twin roll-casting of M2 high-speed steel [J]. Journal of Materials Processing Technology, 2005,166(3):359-363.