Direct Imprinting of Three-Dimensional Microfluidic Scaffolds

您当前的位置：

首页 >

文章列表页 >

Direct Imprinting of Three-Dimensional Microfluidic Scaffolds

更新时间：2025-07-09

- Direct Imprinting of Three-Dimensional Microfluidic Scaffolds
- Vol. 46, Issue 10, Pages: 116-120(2012)
- 作者机构：
  
  西安交通大学机械制造系统工程国家重点实验室,西安,710049
- 作者简介：
- 基金信息：
- DOI：
  CLC： Q811.2
- Online First：10 October 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
Direct Imprinting of Three-Dimensional Microfluidic Scaffolds[J]. 2012, 46(10): 116-120.
DOI：

Direct Imprinting of Three-Dimensional Microfluidic Scaffolds[J]. 2012, 46(10): 116-120. DOI：

摘要

针对软质生物材料支架内部三维微结构成形难题

提出了结合分层制造、微压印与冷冻干燥技术的三维微流道支架直接压印成形方法.通过开发自动化成形设备

实现了材料溶液填充、微结构压印、结构预冻、层间黏结等工艺过程的可控化

从而解决了传统手工操作所造成的结构重复性差、成形效率低等问题.研究了模具表面等离子处理、亲水物质添加、改变溶液填充方式等工艺对自动化成形过程中微结构复型性能的影响.结果表明

向材料溶液中添加微量亲水物质并辅助溶液填充引导

可实现软质水溶性天然生物材料内部复杂微流道结构的精确三维压印成形.通过工艺装备保证了成形过程的自动化和稳定性

从而实现了支架微结构制造的可重复性与可控性.

Abstract

Focusing on constructing complex internal microstructures in soft biomaterials

a novel method is presented to directly fabricate three-dimensional microfluidic scaffolds by combining layer-by-layer fabrication

microimprinting and freeze drying techniques. An automatic fabrication device is developed to realize the controllable processes containing solution casting

microstructure imprinting

freezing and layer binding

to make up poor repeatability and low efficiency in the traditional manual operations. The effects of mold treatment

surfactant addition in material solution as well as solution types on the microstructural replication are investigated. The results demonstrate that combining surfactant addition and guided casting process facilitate the precision fabrication of complex internal microfluidic channels in soft biomaterials.The presented scaffold fabrication process ensures the controllability and reproducibility of predefined microstructures.

关键词

Keywords

references

FUCHS J R, NASSERI B A, VACANTI J P. Tissue engineering: a 21st century solution to surgical reconstruction [J]. The Annals of Thoracic Surgery, 2001, 72(2): 577-591.

ATALA A, BAUER S B, SOKER S, et al. Tissue-engineered autologous bladders for patients needing cystoplasty [J]. Lancet, 2006, 367(9518): 1241-1246.

GROEBER F, HOLEITER M, HAMPEL M, et al. Skin tissue engineering: in vivo and in vitro applications [J]. Advanced Drug Delivery Reviews, 2011, 63(4/5): 352-366.

PAVESIO A, ABATANGELO G, BORRIONE A, et al. Hyaluronan-based scaffolds(hyalograft C)in the treatment of knee cartilage defects: preliminary clinical findings [J]. Novartis Found Symp, 2003, 249(2):203-241.

HUANG H Y, OIZUMI S, KOJIMA N, et al. Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network [J]. Biomaterials, 2007, 28(26): 3815-3823.

STEPHEN S K, HIROFUMI U, JOHN A K, et al. Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels [J]. Ann Surg, 1998, 228(1): 8-13.

赵倩,刘亚雄,高琨,等. 肝组织工程支架的仿生设计与有限元分析[J]. 西安交通大学学报, 2011, 45(8):108-112.

ZHAO Qian, LIU Yaxiong, GAO Kun, et al. Bionics design and finite-element analysis for liver tissue engineering scaffold [J]. Journal of Xi'an Jiaotong University, 2011, 45(8): 108-112.

PAPENBURG B J, LIU Jun, HIGUERA G A, et al. Development and analysis of multi-layer scaffolds for tissue engineering [J]. Biomaterials, 2009, 30(31): 6228-6239.

ROCKWOOD D N, PREDA R C, YUCEL T, et al. Materials fabrication from Bombyx mori silk fibroin [J]. Nature Protocols, 2011, 6(10):1612-1631.

ZHOU Jinwen, ELLIS A V, VOELCKER N H. Recent developments in PDMS surface modification for microfluidic devices [J]. Electrophoresis, 2010, 31(1): 2-16.

TSENG Ming Hsieh, CHIEN Wei Benjamin Ng, KARTHIKEYAN Narayanan, et al. Three-dimensional microstructured tissue scaffolds fabricated by two-photon laser scanning photolithography[J]. Biomaterials, 2010, 31(30): 7648-7652.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Preparation and Properties of Composite Agarose/Collagen Hydrogel

3D Printing/Imprinting Molding Process of Soft Tissue Scaffolds

Diffusion Characteristics and Influencing Factors in Case of Hydrogen Leakage from Fuel Cell Vehicles Running in Tunnels

A Structure-Semantics-Residual Collaborative Image Compression Framework：Towards Privacy Protection and High-Fidelity Reconstruction

Effects of Steam Addition on the Swirl Combustion and Emission Characteristics of Cracked Ammonia

Related Author

朱琳

曲晓丽

占利

李涤尘

靳忠民

王振

王亚宁

陈冬

Related Institution

No data

⁰