Drag Reduction Characteristics on Jetting Surface with Jet Angle-Jet Velocity Coupling

您当前的位置：

首页 >

文章列表页 >

Drag Reduction Characteristics on Jetting Surface with Jet Angle-Jet Velocity Coupling

更新时间：2025-07-09

- Drag Reduction Characteristics on Jetting Surface with Jet Angle-Jet Velocity Coupling
- Vol. 46, Issue 9, Pages: 71-77(2012)
- 作者机构：
  
  哈尔滨工程大学机电工程学院,哈尔滨,150001
- 作者简介：
- 基金信息：
- DOI：
  CLC： TB17
- Online First：10 September 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
Drag Reduction Characteristics on Jetting Surface with Jet Angle-Jet Velocity Coupling[J]. 2012, 46(9): 71-77.
DOI：

Drag Reduction Characteristics on Jetting Surface with Jet Angle-Jet Velocity Coupling[J]. 2012, 46(9): 71-77. DOI：

摘要

针对射流的仿生非光滑表面的减阻问题

运用可拓学基本原理建立了射流角度与射流速度耦元、耦合的可拓模型.利用SST k-ω湍流模型在对射流表面射流角度与射流速度耦合情况下的减阻特性进行了数值模拟

并以此研究了射流表面压差阻力和黏性阻力减小的原因和射流表面边界层的控制行为.结果表明:在射流的角度、速度耦合的情况下

射流表面的减阻性能较好; 当耦合的射流角度为30°、射流速度为1.2 m/s时

减阻率最大

为28.10%; 角度、速度耦合下的射流表面有助于减小模型壁面的速度梯度

增加壁面黏性底层的厚度

继而降低了模型壁面的压差阻力和黏性阻力

并且表现出良好的减阻性能; 耦合下的压差阻力在一定程度上可以作为一种附加的动力

对射流表面流体起到推动的作用.

Abstract

An extension model for coupling elements and coupling ways of the jet angle and jet velocity was built to reduce the resistance of unsmoothed bionics surfaces from the basic extension theory. With the SST k-ω turbulence model

the simulation on the drag reduction characteristics with the jet angle-jet velocity coupling was performed

and then the reasons for reducing the viscous resistance and pressure resistance of the jetting surface and the controlling behavior of jetting surface towards the boundary layer were explored. The results show that the drag reduction effect of the jetting surface is better when the jet angle and the jet velocity are coupled. The maximum drag reduction rate reaches 28.10% when the jet angle is 30° coupled with the jet velocity of 1.2 m/s. With the jet angle-jet velocity coupling

the jetting surface can reduce the velocity gradient at the wall and increase the viscous sublayer thickness

thus reducing the pressure resistance and viscous resistance at the wall and then leading to the drag reduction. In addition

the pressure resistance with the coupling

as an additional power to a certain extent

has a propelling effect on the fluid of the jetting surface.

关键词

Keywords

references

耿湘人, 桂业伟, 王安龄, 等. 利用二维平面和轴对称逆向喷流减阻和降低热流的计算研究 [J].空气动力学学报, 2006, 24(1):85-89.

GENG Xiangren, GUI Yewei, WANG Anling, et al. Numerical investigation on drag and heat-transfer reduction using 2-D planar and axisymmetrical forward facing jet[J]. Acta Aerodynamica Sinica, 2006, 24(1):85-89.

石清, 李桦. 增升减阻流动控制技术的数值模拟研究[J]. 空气动力学学报, 2011, 29(3):280-287.

SHI Qing, LI Hua. Numerical simulation about the effects of flow control for increasing lift and decreasing drag [J]. Acta Aerodynamica Sinica, 2011, 29(3): 280-287.

关晖, 吴锤结. 湍流横向射流的大涡模拟及其涡结构特性[J]. 中国科学:G 物理学,力学,天文学, 2006, 36(6):662-677.

GUAN Hui, WU Chuijie. Characteristics of vortex structures for large-eddy simulation of turbulent jets in crossflow [J]. Science in China: G Physics, Mechanics Astronomy, 2006, 36(6):662-677.

蔡晋生, 刘秋洪. 超声速流场中侧向射流的数值研究[J]. 空气动力学学报, 2010, 28(5):553-558.

CAI Jinsheng, LIU Qiuhong. Numerical investigation of lateral jets in supersonic cross-flows [J]. Acta Aerodynamica Sinica, 2010, 28(5):553-558.

MEYER B, NELSON H F, RIGGINS D W. Hypersonic drag and heat-transfer reduction using a forward-facing jet [J]. Journal of Aircraft, 2001, 38(4):680-686.

ESWAR J, MARK P, WILLIAM B B. Applications of a counterflow drag reduction technique in high-speed systems [J]. Journal of Spacecraft and Rockets, 2002, 39(4):605-614.

BARBER M, SCHETZ J, ROE L. Normal sonic helium injection through a wedge shaped orifice into a supersonic flow [J]. Journal of Propulsion and Power, 1997, 13(2):257-263.

ZHAO G, GU Y Q, ZHENG J X, et al. The study of the small drag reduction testing platform [C]∥2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce. Los Alamitos, USA: IEEE Computer Society, 2011:6021-6024.

ZHAO G, ZHAO H L, SHU H S, et al. Simulation study of bionic jetting direction influence on drag reduction effect [J]. Advances in Nature Science, 2010, 3(2):17-26.

赵华琳. 仿生射流表面减阻特性及减阻机理研究 [D].哈尔滨: 哈尔滨工程大学, 2011.

赵燕伟, 苏楠. 可拓设计[M].北京:科学出版社,2010: 12-56.

张成春, 任露泉, 王晶, 等. 旋成体仿生凹坑表面流场控制减阻仿真分析 [J]. 兵工学报, 2009, 30(8):1066-1072.

ZHAGN Chengchun, REN Luquan, WANG Jing, et al. Simulation on flow control for drag reduction of revolution body using bionic dimpled surface [J]. Acta Armamentar, 2009, 30(8):1066-1072.

吴晓明, 李国君, 丰镇平, 等. SST k-ω-kp两相湍流模型及其在湿蒸汽凝结流动数值模拟中的应用 [J].西安交通大学学报, 2007, 41(5):526-530.

WU Xiaoming, LI Guojun, FENG Zhenping, et al. SST k-ω-kp two-phase turbulence model and its application in numerical simulation of wet steam flow with condensation [J]. Journal of Xi'an Jiaotong University, 2007, 41(5): 526-530.

张获,樊涛,蓝吉兵,等. 涡旋射流控制逆压梯度平板边界层分离的涡结构研究. 2012,46(1): 1-8.

韩永强,谢永慧,张获,等. 空气环境中水滴和半空间弹性体撞击力学行为的数值模拟. 2011,45(5): 102-107.

叶冬挺,张获,蓝吉兵,等. 合成射流控制下低压高负荷透平叶片边界层分离大涡模拟. 2011,45(3): 58-64.

刘小民,周海涛,王星,等. 低压透平叶片表面合成射流非定常流动控制机理研究. 2011,45(3): 95-101.

刘钊,丰镇平,宋立明. 实际叶片前缘冲击冷却流动和换热的数值研究. 2011,45(1): 5-9.

郭栋,魏进家,张永海. 方柱微结构芯片射流冲击流动沸腾换热实验研究. 2011,4591): 31-37.

谢永慧,樊涛,张获. 定常与脉冲涡旋射流下矩形扩压器流动分离控制研究. 2010,44(11): 1-5.

刘小民,周海洋. 低压透平叶片流动分离主动控制的数值研究. 2010,44(9): 21-26.

邝九杰,隋丹,金东苑,等. 轴流风扇冲击射流下泡沫铝热沉的换热特性. 2010,44(3): 6-10.

石(龙)/(天),李少军,邓清华,等. 透平级轴向间隙对非定常流动干涉影响的研究. 2009,43(9): 9-13.

刘小民,肖立宁.射流式旋涡发生器对离心叶轮性能的影响. 2009,43(6): 123-128.

王海军, 卜琳,罗毓珊,等. 扇形射流的空气动力学特性. 2009,43(3): 97-100.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of the Mechanism of Electrostatic Accumulation and Current Density Distribution Characteristics During Liquid Hydrogen Pipeline Transportation

Numerical Simulation of Space Charge Distribution Characteristics of Polyimide Materials under X-Ray Irradiation

Numerical Simulation Study on Geothermal Extraction Characteristics of Supercritical CO2 in Heterogeneous Fractures

Action Mechanism of Heat Transfer between the Working Medium and the Impeller on Aerodynamic Performance and Flow Characteristics of Radial Inflow Turbines with Supercritical Carbon Dioxide

Analysis of the Attached Vortex Model for the Flow Characteristics of Wing Near-Field Wakes

Related Author

SUN Wenhao

LIU Hongbao

WANG Lei

QING Ziyou

LI Zhuolun

MA Yuan

LI Yanzhong

ZHONG Hui

Related Institution

School of Energy and Power Engineering，Xi’an Jiaotong University

Aerospace System Engineering Shanghai

School of Electrical Engineering，Xi’an Jiaotong University

Northwest Institute of Nuclear Technology

Institute of Electronic Engineering，China Academy of Engineering Physics

⁰