谢非.多失效模式下的涡轮叶片疲劳寿命预测与灵敏度分析[D].电子科技大学,2020(07).

丁如昌.航空发动机涡轮盘疲劳可靠性建模和分析[D].电子科技大学,2019(12).

王爱华.涡轮叶盘疲劳—蠕变耦合失效可靠性分析[D].哈尔滨理工大学,2018(01).

王轶凡.航空发动机涡轮盘的寿命预测及可靠性研究[D].大连理工大学,2017(04).

赵霞.某涡浆发动机涡轮转子强度与寿命计算[D].南京航空航天大学,2005(05).

Ecker Alexander,Unterweger Harald.Fatigue design in penstocks – comparison of the nominal stress and structural stress method for common details[J].ce/papers,2021.

Ning-Cong Xiao,Ming J. Zuo,Chengning Zhou.A new adaptive sequential sampling method to construct surrogate models for efficient reliability analysis[J].Reliability Engineering and System Safety,2018.

Zhixun Wen,Haiqing Pei,Hai Liu,Zhufeng Yue.A Sequential Kriging reliability analysis method with characteristics of adaptive sampling regions and parallelizability[J].Reliability Engineering and System Safety,2016.

V. Aute,K. Saleh,O. Abdelaziz,S. Azarm,R. Radermacher.Cross-validation based single response adaptive design of experiments for Kriging metamodeling of deterministic computer simulations[J].Structural and Multidisciplinary Optimization,2013.

B. Echard,N. Gayton,M. Lemaire.AK-MCS: An active learning reliability method combining Kriging and Monte Carlo Simulation[J].Structural Safety,2011.

DOWLING N. E. CALHOUN C. A. ARCARI A..Mean stress effects in stress-life fatigue and the Walker equation[J].Fatigue & Fracture of Engineering Materials & Structures,2009.

I.M Sobol′.Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates[J].Mathematics and Computers in Simulation,2001.

Jerome Sacks,William J. Welch,Toby J. Mitchell,Henry P. Wynn.Design and Analysis of Computer Experiments[J].Statistical Science,1989(4).

S. S. Manson,G. R. Halford.Correction: Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage[J].International Journal of Fracture,1981(4).

郑新前,王钧莹,黄维娜,伏宇,程荣辉,熊洪洋.航空发动机不确定性设计体系探讨[J].航空学报,2023(07).

陆艺鑫,吕震宙,冯凯旋,何良莉.涡轮轴低周疲劳寿命可靠性分析及优化设计方法研究[J].推进技术,2022(02).

贾贝熙,吕震宙,雷婧宇.涡轮冷却叶片寿命可靠性分析参数化仿真平台[J].航空学报,2021(12).

黄晓宇,王攀,李海和,张政.具有模糊失效状态的涡轮盘疲劳可靠性及灵敏度分析[J].西北工业大学学报,2021(06).

杨子龙,张大鹏,苑天宇,李磊.燃气轮机涡轮盘强度寿命分析流程研究[J].热能动力工程,2021(09).

彭建强,吕振家,张宏涛,李毅刚,闫红博.重型燃气轮机用大型高温合金轮盘锻件研究[J].热力透平,2020(02).

冀春俊,徐浩,孙琦,孙淼.基于Kriging模型的快速拆装叶轮轮盘多目标优化设计[J].风机技术,2017(03).

白斌,白广忱.Dynamic probabilistic analysis of stress and deformation for bladed disk assemblies of aeroengine[J].Journal of Central South University,2014(10).

吕震宙,宋述芳,李璐祎,王燕萍.结构/机构可靠性设计基础[M].西北工业大学出版社,2019.

王荣桥,胡殿印.发动机结构可靠性设计理论及应用[M].科学出版社,2017.

《航空发动机设计用材料数据手册》编委会, 编.航空发动机设计用材料数据手册[M].航空工业出版社,2010.

吕志强.航空发动机轮盘低周疲劳寿命预测方法研究[D].电子科技大学,2016(02).