张恒,吴晓东,李映艳,钱根葆,赵阔,王杰.全金属螺杆泵漏失机理[J].科学技术与工程,2020(13).

王增丽,申迎峰,王宗明,王萌,冯全科.圆盘密封单螺杆泵啮合特性研究[J].西安交通大学学报,2018(05).

冷琴,刘宗旭.污油回收系统设计[J].石油化工设计,2017(02).

潘成程,徐飞,谭昱全,冯驹先,干蜀毅.双螺杆真空泵封闭容积间压力和泄漏特性研究[J].真空,2015(03).

叶卫东,郭玉双,杜秀华,宋玉杰.螺杆泵内部压力分布规律研究[J].科学技术与工程,2009(11).

王炯,徐建宁,屈文涛,刘劲松,马建平.潜油双螺杆泵间隙的优化设计[J].石油机械,2008(08).

赵毅.基于三维建模的采油螺杆泵压力分布规律研究[D].东北石油大学,2011(04).

Department of Building Civil and Environmental Engineering, Concordia University, 1455 De Maisonneuve Blvd. W., Montreal, Quebec, H3G 1M8, Canada,Department of Building Civil and Environmental Engineering, Concordia University, 1455 De Maisonneuve Blvd. W., Montreal, Quebec, H3G 1M8, Canada.Electrokinetically assisted oil-water phase separation in oily sludge with implementing novel controller system[J].Journal of Hazardous Materials,2018.

J Q Wang,F S Shui,Q F Li.Research on Treatment Technology and Device of Oily Sludge[J].IOP Conference Series: Materials Science and Engineering,2017.

Yafei Shen,Xingming Chen,Junfeng Wang,Xinlei Ge,Mindong Chen.Oil sludge recycling by ash-catalyzed pyrolysis-reforming processes[J].Fuel,2016.

J. Manikandan,V. Senthil,S. Nagarajan.Effect of Bowl-Impeller Axial Gap in a Mixed Flow Submersible Pump Using Computational Fluid Dynamics[J].International Review of Mechanical Engineering IREME,2014.

Sunghun Kim,Ulf Piepenstock,Hubertus Murrenhoff.Effects of Manufacturing Deviation on the Pressure Pulsation of three Screw Pumps[J].International Journal of Fluid Power,2011(1).

Rong Yan,David Tee Liang,Leslie Tsen.Case studies––Problem solving in fluidized bed waste fuel incineration[J].Energy Conversion and Management,2004(7).