多相电机容错控制策略综述

您当前的位置：

首页 >

文章列表页 >

多相电机容错控制策略综述

更新时间：2025-07-09

- 多相电机容错控制策略综述
- Issue 6, Pages: 176-184(2021)
- 作者机构：
  
  1. 西安交通大学电力设备电气绝缘国家重点实验室
  2. 西安交通大学电气工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC： TM301.2
- Published：2021
- 稿件说明：
移动端阅览
[J]. 2021, (6): 176-184.
DOI：

[J]. 2021, (6): 176-184. DOI：

摘要

为客观全面地反映目前多相电机容错控制领域的研究进展

使其在风力发电、船舶推进、轨道交通与航空航天等大功率及可靠性要求高的应用场合展现出更好的应用潜力

本文系统深入地对国内外相关研究进行了分析

总结了多相电机的故障后稳态分析方法

详细论述了多相电机故障后容错参考电流的生成方法

包括基于故障前后磁动势不变的容错控制策略和基于故障瞬间转矩不变的容错控制策略;介绍了容错电流的优化及跟踪方法

并介绍了直接转矩控制与模型预测控制在多相电机容错控制策略中的应用;讨论了上述各种控制方法的优缺点;最后对上述控制技术进行了总结与展望

分析了多相电机容错控制技术的发展趋势

对多相电机及容错控制的发展及后续研究提供参考。

Abstract

关键词

Keywords

references

高宏伟,杨贵杰.五相永磁同步电机缺相运行的建模与控制[J].电工技术学报,2016(20).

谢德娥,王宇,邓智泉.考虑反电动势2次谐波的容错型磁通切换电机开路及短路故障控制策略[J].电工技术学报,2016(14).

赵文祥,唐建勋,吉敬华,刘国海.五相容错式磁通切换永磁电机及其控制[J].中国电机工程学报,2015(05).

李俊卿,任彦珍,王栋.双馈感应电机的多回路数学模型及其电感参数的计算[J].大电机技术,2013(06).

孔武斌,黄进,康敏,李炳楠,耿泽暘.多相电机非正弦供电下的定子缺相容错控制[J].电机与控制学报,2013(05).

吴一丰,邓智泉,王宇,王晓琳.六相永磁容错磁通切换电机及其单相故障的容错控制[J].电工技术学报,2013(03).

郝振洋,胡育文,黄文新,余文涛,许顺.永磁容错电机最优电流直接控制策略[J].中国电机工程学报,2011(06).

王祥珩,孙宇光,桂林,王维俭.发电机内部故障分析软件的理论基础——多回路分析法[J].水电自动化与大坝监测,2003(04).

郑应平.控制科学面临的挑战——专家意见综述[J].控制理论与应用,1987(03).

朱建光.六相永磁同步电动机驱动控制系统的研究[D].沈阳工业大学,2010(08).

张立霞.电磁场有限元分析中并行计算的研究[D].河北工业大学,2006(08).

Kiselev Aleksej,Catuogno Guillermo R.,Kuznietsov Alexander,Leidhold Roberto.Finite-Control-Set MPC for Open-Phase Fault-Tolerant Control of PM Synchronous Motor Drives[J].IEEE Transactions on Industrial Electronics,2020.

Zhou Huawei,Zhou Cheng,Tao Weiguo,Wang Jiabin,Liu Guohai.Virtual-Stator-Flux-Based Direct Torque Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor With Open-Circuit Fault[J].IEEE Transactions on Power Electronics,2020.

Zhe Liang,Deliang Liang,Peng Kou,Shaofeng Jia.Postfault Control and Harmonic Current Suppression for a Symmetrical Dual Three-Phase SPMSM Drive Under Single-Phase Open-Circuit Fault[J].IEEE Access,2020.

Cong Xiong,Haiping Xu,Tao Guan,Peng Zhou.Fault-tolerant FOC for five-phase SPMSM with non-sinusoidal back EMF[J].IET Electric Power Applications,2019.

Chen Qian,Gu Licheng,Lin Zhipeng,Liu Guohai.Extension of Space-Vector-Signal-Injection Based MTPA Control Into SVPWM Fault-Tolerant Operation for Five-Phase IPMSM[J].IEEE Transactions on Industrial Electronics,2019.

Wentao Huang,Wei Hua,Fangbo Yin,Feng Yu,Ji Qi.Model Predictive Thrust Force Control of a Linear Flux-Switching Permanent Magnet Machine With Voltage Vectors Selection and Synthesis.[J].IEEE Trans. Industrial Electronics,2019.

Kodumur Meesala Ravi Eswar,Kunisetti Venkata Praveen Kumar,Kumar Thippiripati Vinay.Enhanced Predictive Torque Control for Open End Winding Induction Motor Drive Without Weighting Factor Assignment[J].IEEE Transactions on Power Electronics,2019.

Huang Wentao,Hua Wei,Chen Fuyang,Yin Fangbo,Qi Ji.Model Predictive Current Control of Open-Circuit Fault-Tolerant Five-Phase Flux-Switching Permanent Magnet Motor Drives[J].IEEE Journal of Emerging and Selected Topics in Power Electronics,2018.

Cheng Luming,Sui Yi,Zheng Ping,Wang Pengfei,Wu Fan.Implementation of Postfault Decoupling Vector Control and Mitigation of Current Ripple for Five-Phase Fault-Tolerant PM Machine Under Single-Phase Open-Circuit Fault[J].IEEE Transactions on Power Electronics,2018.

Tian Bing,Mirzaeva Galina,An Qun Tao,Sun Li,Semenov Dmitry.Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor for Industry Applications[J].IEEE Transactions on Industry Applications,2018.

Bermudez Mario,Gonzalez Prieto Ignacio,Barrero Federico,Guzman Hugo,Kestelyn Xavier,Duran Mario J..An Experimental Assessment of Open-Phase Fault-Tolerant Virtual-Vector-Based Direct Torque Control in Five-Phase Induction Motor Drives[J].IEEE Transactions on Power Electronics,2018.

Hanxiao Lu,Jian Li,Ronghai Qu,Donglin Ye.Fault-tolerant predictive current control with two-vector modulation for six-phase permanent magnet synchronous machine drives[J].IET Electric Power Applications,2018.

Baneira Fernando,Doval Gandoy Jesus,Yepes Alejandro G.,Lopez Oscar,Perez Estevez Diego.Control Strategy for Multiphase Drives With Minimum Losses in the Full Torque Operation Range Under Single Open-Phase Fault[J].IEEE Transactions on Power Electronics,2017.

Zhou Huawei,Zhao Wenxiang,Liu Guohai,Cheng Ran,Xie Ying.Remedial Field-Oriented Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor by Using Reduced-Order Transformation Matrices[J].IEEE Transactions on Industrial Electronics,2017.

Guzman, Hugo,Duran, Mario J.,Barrero, Federico,Zarri, Luca,Bogado, Blas,Prieto, Ignacio Gonzalez,Arahal, Manuel R..Comparative Study of Predictive and Resonant Controllers in Fault-Tolerant Five-Phase Induction Motor Drives[J].IEEE Transactions on Industrial Electronics,2016.

Mohammadpour, Ali,Parsa, Leila.Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines[J].IEEE Transactions on Industry Applications,2015.

Che Hang Seng,Duran Mario J.,Levi Emil,Jones Martin,Hew Wooi Ping,Rahim Nasrudin Abd..Postfault Operation of an Asymmetrical Six-Phase Induction Machine With Single and Two Isolated Neutral Points[J].IEEE Transactions on Power Electronics,2014.

Ramin Salehi Arashloo,Jose Luis Romeral Martinez,Mehdi Salehifar,Manuel Moreno-Eguilaz.Genetic algorithm-based output power optimisation of fault tolerant five-phase brushless direct current drives applicable for electrical and hybrid electrical vehicles[J].IET Electric Power Applications,2014.

Ali Mohammadpour,Sandipan Mishra,Leila Parsa.Fault-Tolerant Operation of Multiphase Permanent-Magnet Machines Using Iterative Learning Control[J].IEEE Journal of Emerging and Selected Topics in Power Electronics,2014.

Ali Mohammadpour,Siavash Sadeghi,Leila Parsa.A Generalized Fault-Tolerant Control Strategy for Five-Phase PM Motor Drives Considering Star, Pentagon, and Pentacle Connections of Stator Windings[J].IEEE Transactions on Industrial Electronics,2014.

Tani, A.,Mengoni, M.,Zarri, L.,Serra, G.,Casadei, D..Control of Multiphase Induction Motors With an Odd Number of Phases Under Open-Circuit Phase Faults[J].IEEE Transactions on Power Electronics,2012.

Franck Betin,Gerard-Andre Capolino.Shaft Positioning for Six-Phase Induction Machines With Open Phases Using Variable Structure Control[J].IEEE Transactions on Industrial Electronics,2012.

Xavier Kestelyn,Eric Semail.A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time.[J].IEEE Trans. Industrial Electronics,2011.

Zhao Y.,Lipo T.A..Modeling and control of a multi-phase induction machine with structural unbalance[J].IEEE Transactions on Energy Conversion,1996(3).

Toliyat H.A.,Lipo T.A..Transient analysis of cage induction machines under stator, rotor bar and end ring faults[J].IEEE Transactions on Energy Conversion,1995(2).

Jen-Ren Fu,Lipo T.A..Disturbance-free operation of a multiphase current-regulated motor drive with an opened phase[J].IEEE Transactions on Industry Applications,1994(5).

D. D. Siljak.Reliable control using multiple control systems[J].International Journal of Control,1980(2).

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of Observer and Dynamic Output Feedback Fault Tolerant Controller Based on T-S Fuzzy Model

A Fault-Tolerant Control Strategy and Simulation Analysis of Five-Phase Permanent Magnet Motor with Third-Harmonic Suppression

Energy Efficiency Optimization of the Cryogenic Air Separation Process for Electronic-Grade Ultra Pure Nitrogen

Electrothermal Coupling Research on the Evolutionary Law of Anti-Corona Performance for High-Altitude Air-Cooled Generators

A Fast Calculation Method for Thermal Flow Fields in Transformer Windings Based on PI-DeepONet

Related Author

朱芳来

蒋鹏

李晓航

程祎

杜钦君

张铭

宋传明

张明哲

Related Institution

School of Electronics and Information Engineering, Tongji University

School of Electrical and Electronic Engineering, Shandong University of Technology

⁰