蒋鑫.基于CFD的低比转速离心泵叶片结构优化研究[D].吉林大学,2018(12).

冯坚,吴志军.涡轮增压器压气机机油密封能力试验及应用[J].柴油机设计与制造,2018(01).

王亚泰,闫柯,朱永生,洪军,张优云.保持架不同引导方式下角接触球轴承腔内气相流动分析[J].机械工程学报,2017(01).

翟强,闫柯,张优云,洪军,朱永生.高速角接触球轴承腔内气相流动与传热特性研究[J].西安交通大学学报,2014(12).

何洪,曹立峰,吴新涛,吉建波.增压器密封结构改进对漏油的影响研究[J].车用发动机,2014(04).

束卫兵,李庆斌,杨迪,曹刚,闫海东.增压器压气机密封性能模拟与试验研究[J].车用发动机,2013(04).

徐思友,吴新涛,闫瑞乾,武玉珍.增压器轴承和密封环温度试验研究[J].车用发动机,2010(02).

魏名山,马朝臣,黄若.车用涡轮增压器密封结构的检测[J].车用发动机,2004(04).

Ke Yan,Jinhua Zhang,Jun Hong,Yatai Wang,Yongsheng Zhu.Structural optimization of lubrication device for high speed angular contact ball bearing based on internal fluid flow analysis[J].International Journal of Heat and Mass Transfer,2016.

M.H. Shojaeefard,M. Tahani,M.B. Ehghaghi,M.A. Fallahian,M. Beglari.Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid[J].Computers and Fluids,2012.

Clemens Simon,Klaus Lang,Peter Feigl,Eberhard Bock.Turbocharger seal as a decisive enabler for downsizing concepts[J].Sealing Technology,2011(1).

B. Jafarzadeh,A. Hajari,M.M. Alishahi,M.H. Akbari.The flow simulation of a low-specific-speed high-speed centrifugal pump[J].Applied Mathematical Modelling,2010(1).

Shahram Derakhshan,Ahmad Nourbakhsh.Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation[J].Experimental Thermal and Fluid Science,2008(8).

Weidong Zhou,Zhimei Zhao,T. S. Lee,S. H. Winoto.Investigation of Flow Through Centrifugal Pump Impellers Using Computational Fluid Dynamics[J].International Journal of Rotating Machinery,2003(1).

陈淘利.叶轮背叶片对离心泵轴向力特性影响的研究[D].兰州理工大学,2018(09).

金波.涡轮增压器密封性研究[D].北京理工大学,2015(03).

董俊熠.提高涡轮增压器密封环成品率的工艺改进及修口专机研制[D].武汉理工大学,2012(12).