[1]白恩军,黄树涛,谢里阳.采用等效载荷的装甲车辆扭力轴疲劳可靠性评估[J].西安交通大学学报,2020,54(09):066-71.[doi:10.7652/xjtuxb202009007]
 BAI Enjun,HUANG Shutao,XIE Liyang.Fatigue Reliability Modelling and Evaluation of Torsion Shaft for Armored Vehicles Using Equivalent Load Spectrum[J].Journal of Xi'an Jiaotong University,2020,54(09):066-71.[doi:10.7652/xjtuxb202009007]
点击复制

采用等效载荷的装甲车辆扭力轴疲劳可靠性评估
分享到:

《西安交通大学学报》[ISSN:0253-987X/CN:61-1069/T]

卷:
54
期数:
2020年第09期
页码:
066-71
栏目:
出版日期:
2020-09-10

文章信息/Info

Title:
Fatigue Reliability Modelling and Evaluation of Torsion Shaft for Armored Vehicles Using Equivalent Load Spectrum
文章编号:
0253-987X(2020)09-0066-06
作者:
白恩军1 黄树涛1 谢里阳2
1.沈阳理工大学汽车与交通学院, 110159, 沈阳; 2.东北大学航空动力装备振动及控制教育部重点实验室, 110819, 沈阳
Author(s):
BAI Enjun1 HUANG Shutao1 XIE Liyang2
1. School of Automobile and Transportation, Shenyang Ligong University, Shenyang 110159, China; 2. Laboratory of Vibration and Control of Aero-Propulsion System, Northeastern University, Shenyang 110819, China
关键词:
可靠性评估 随机载荷 连续模型 扭力轴 P-S-N曲线
Keywords:
reliability evaluation random load continuous model torsion shaft P-S-N curve
分类号:
TB114
DOI:
10.7652/xjtuxb202009007
文献标志码:
A
摘要:
为了评估扭力轴在随机载荷作用下的动态疲劳可靠性,提出了一种基于疲劳可靠性异量纲干涉模型的扭力轴动态疲劳可靠性评估方法。将实测扭力轴载荷频次谱进行分布拟合,生成随机载荷历程,利用雨流计数法获得载荷幅值、均值和循环次数,经平均应力修正后统计极值载荷分布,构建等效输入应力谱,避免了多次载荷等效的统计分析; 基于材料P-S-N曲线,应用样本集聚原理建立疲劳寿命概率分布连续模型,实现变幅应力疲劳寿命的连续表达。对某扭力轴疲劳可靠度的分析结果表明:在寿命为15×104 km时,计算的扭力轴疲劳可靠度与文献方法计算结果相对误差小于2%,扭力轴疲劳可靠度的50次和10 000次仿真结果的变异系数均小于1%。
Abstract:
To evaluate the dynamic fatigue reliability of a torsion shaft under random loads, an evaluation method for the dynamic fatigue reliability of torsion shaft is proposed based on the dissimilar-dimension interference model of fatigue reliability. The measured load frequency spectrum of a torsion shaft is analyzed and the probability distribution is fitted. The random load spectrum is obtained using the probability distribution of load. The amplitude, mean value and number of cycles are obtained using the rainflow counting method. The equivalent stress spectrum is obtained by the statistic extreme load after amending mean stress. Therefore, frequent statistical analysis of equivalent constant load is avoided. A continuous model of probability distribution of fatigue life is established following the principle of sample concentration and P-S-N curves of material. The expression of fatigue life under variable amplitude stress is obtained. The reliability analysis of a torsion shaft shows that the reliability difference between the proposed method and a reference method is less than 2%. The variation coefficient is less than 1% through statistical analysis on the results obtained by multiple simulations under random loads.

参考文献/References:

[1] 杨涛, 孙伟, 王红岩. 基于虚拟样机技术的坦克扭力轴疲劳强度分析 [J]. 装甲兵工程学院学报, 2006, 20(3): 59-63.
YANG Tao, SUN Wei, WANG Hongyan. Fatigue intensity analysis of the torsion bar of a tank based on virtual prototyping technique [J]. Journal of Academy of Armored Force Engineering, 2006, 20(3): 59-63.
[2] 闫思宏, 陶凤和, 贾长治. 履带车辆承载关重件耐久性疲劳预测与结构优化 [J]. 机械强度, 2018, 40(4): 1012-1016.
YAN Sihong, TAO Fenghe, JIA Changzhi. Durability fatigue prediction and structure optimization of load-bearing key part of tracked vehicle [J]. Journal of Mechanical Strength, 2018, 40(4): 1012-1016.
[3] 周国峰, 李晓延, 史耀武, 等. 某型主战坦克扭力轴工作过程数值模拟及寿命预测 [J]. 机械强度, 2006, 28(4): 578-581.
ZHOU Guofeng, LI Xiaoyan, SHI Yaowu, et al. Numerical simulation of the working process and life prediction of a tank torsion shaft [J]. Journal of Mechanical Strength, 2006, 28(4): 578-581.
[4] 易当祥, 刘春和, 赵韶平, 等. 随机载荷作用下自行火炮扭力轴疲劳可靠性分析与仿真 [J]. 兵工学报, 2007, 28(12): 14-17.
YI Dangxiang, LIU Chunhe, ZHAO Shaoping, et al. Fatigue reliability analysis and simulation of self-propelled gun’s torsion bar under random loads [J]. Acta Armamentarii, 2007, 28(12): 14-17.
[5] CHOI J H, LEE H C, SHABANA A A. Spatial dynamics of multibody tracked vehicles: part I Spatial equations of motion [J]. Vehicle System Dynamics, 1998, 29(1): 27-49.
[6] ZHI Jianzhuang, LIU Guangsheng, ZHANG Junjun, et al. Load spectrum measurement and fatigue life prediction of torsion shaft of self-propelled guns [C]∥Proceedings of the International Conference on Quality, Reliability, Risk, Maintenance and Safety Engineering. Piscataway, NJ, USA: IEEE, 2012: 975-979.
[7] LI Yadong, ZHENG Jian, JIA Changzhi. Experiment study and fatigue life prediction of torsion shaft of self-propelled gun based on stochastic response surface method [C]∥Proceedings of the 2009 9th International Conference on Electronic Measurement and Instruments. Piscataway, NJ, USA: IEEE, 2009: 664-668.
[8] 狄长春, 杜中华, 王兴贵. 自行火炮扭力轴疲劳寿命仿真研究 [J]. 火炮发射与控制学报, 2004(4): 39-41.
DI Changchun, DU Zhonghua, WANG Xinggui. Fatigue life simulation about torsion bar of self-propelled gun [J]. Gun Launch and Control Journal, 2004(4): 39-41.
[9] 刘喆, 陶凤和, 贾长治. 多种失效模式履带车辆扭力轴可靠性稳健设计 [J]. 北京航空航天大学学报, 2016, 42(4): 815-820.
LIU Zhe, TAO Fenghe, JIA Changzhi. Reliability ro-bust design of tracked vehicle torque axis with multiple failure modes [J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(4): 815-820.
[10] 刘勤, 钱云鹏, 姬广振, 等. 随机载荷作用下扭力轴耐久性优化设计 [J]. 兵工学报, 2015, 36(5), 933-937.
LIU Qin, QIAN Yunpeng, JI Guangzhen, et al. Durability-based design optimization of torsion shaft under random loading [J]. Acta Armamentarii, 2015, 36(5), 933-937.
[11] 汤清洪, 马吉胜, 贾长治. 扭力轴多工况二维随机疲劳载荷谱的编制 [J]. 振动与冲击, 2007, 26(2): 105-106.
TANG Qinghong, MA Jisheng, JIA Changzhi. Establishment of two-dimensional stochastic fatigue load spectrum in multiple-loading case for torsion shaft [J]. Journal of Vibration and Shock, 2007, 26(2): 105-106.
[12] 谢里阳. 机械可靠性基本理论与方法 [M]. 北京: 科学出版社, 2009: 90-92.
[13] 林吉忠. 金属的缺陷、载荷与疲劳 [M]. 北京: 中国铁道出版社, 1993: 96-100.
[14] 机械工程材料性能数据手册编委会. 机械工程材料性能数据手册 [M]. 北京: 机械工业出版社, 1995: 280-281.
[15] 周国峰, 李晓延, 史耀武, 等. 坦克扭力轴表面缺陷对疲劳寿命的影响 [J]. 材料科学与工艺, 2008, 16(1): 6-10.
ZHOU Guofeng, LI Xiaoyan, SHI Yaowu, et al. Influence of surface notch on fatigue life of tank torsion shaft [J]. Materials Science and Technology, 2008, 16(1): 6-10.
[16] 胡杰鑫, 谢里阳, 尹伟, 等. 复杂结构件疲劳可靠性模型与评估技术研究 [J]. 西安交通大学学报, 2018, 52(7): 123-129.
HU Jiexin, XIE Liyang, YIN Wei, et al. Study on fatigue reliability model and evaluation method of complex structures [J]. Journal of Xi’an Jiaotong University, 2018, 52(7): 123-129.

相似文献/References:

[1]徐宇亮,陈西宏,孙际哲,等.采用虚拟样本加速退化试验的复杂电子设备可靠性评估[J].西安交通大学学报,2013,47(06):079.[doi:10.7652/xjtuxb201306014]
 XU Yuliang,CHEN Xihong,SUN Jizhe,et al.Reliability Assessment for Complicated Electronic Equipment with Virtual Samples of Accelerated Degradation Tests[J].Journal of Xi'an Jiaotong University,2013,47(09):079.[doi:10.7652/xjtuxb201306014]
[2]孟文俊,张四聪,淡紫嫣,等.按类统计方法在滚动轴承可视化可靠性动态评估中的应用[J].西安交通大学学报,2018,52(06):023.[doi:10.7652/xjtuxb201806004]
 MENG Wenjun,ZHANG Sicong,DAN Ziyan,et al.Dynamic Assessment of Rolling Bearing Reliability by State Visualization Based on Class Statistics[J].Journal of Xi'an Jiaotong University,2018,52(09):023.[doi:10.7652/xjtuxb201806004]

备注/Memo

备注/Memo:
收稿日期: 2020-03-26。作者简介: 白恩军(1986—),男,博士后; 黄树涛(通信作者),男,教授。基金项目: 辽宁省教育厅科学技术研究资助项目(LG202022)。
更新日期/Last Update: 2020-09-10